G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through February 25, 2007 » ENGINE EXPERTS: EVER HEAR OF THE CM OIL FILTER SYSTEM? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Monday, February 19, 2007 - 06:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)


hh


Made by Canton Racing Products, these filters are supposed to have a unique combination of high flow rate, (no by-pass valve is fitted or required), and very high filtration of 8 microns - most other high quality filters are 18 microns.


ddd


The filter material is wrapped around a perforated steel core. Claimed interval between changes is 10.000 miles.

Of course they are a bit spendy; $90 for the cannister and insert, $14 for replacement filters. The cannister stays on the bike, and the replacement filters are installed from the bottom.

The model number for the XB Buells is 25-262

I was wondering if any of the high performance people on the board have heard of them?
Top of pagePrevious messageNext messageBottom of page Link to this message

Ridrx
Posted on Monday, February 19, 2007 - 07:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

If that is the same Canton products that makes oil pans for autosports I would have to think it was top shelf, as oiling systems are their primary business. I ran one of their pan and dry sump 3 stage systems on a 5.0 stang a few years back. All my drag friends still use their stuff, I'll ask around.
Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Monday, February 19, 2007 - 07:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks John.

Yes, that is the very same Canton company that makes all those competition pans.
Top of pagePrevious messageNext messageBottom of page Link to this message

Liquorbox
Posted on Tuesday, February 20, 2007 - 12:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

http://www.cmfilters.com/spin-on.cfm
Top of pagePrevious messageNext messageBottom of page Link to this message

Tiburondriver47
Posted on Tuesday, February 20, 2007 - 03:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Wouldn't 4 1/4" be to tall? I believe the stock one is 3" on my XB12R.
Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Tuesday, February 20, 2007 - 04:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Good point Donald.

I was wondering that myself.

Right now my bike is in my friend's heated garage. I will go over there in the next day or two and measure. I sort of remember that there is quite a bit of room under it, because when I recently changed the filter, I used a cup wrench that went under the filter.

I will report back. Actually, I was even gave some thought to using the longer one for added oil capacity and greater cooling.
Top of pagePrevious messageNext messageBottom of page Link to this message

Treadmarks
Posted on Tuesday, February 20, 2007 - 05:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I'm cool with the K&N 177. They make a great filter and it is easy on and easy off.
Top of pagePrevious messageNext messageBottom of page Link to this message

No_rice
Posted on Tuesday, February 20, 2007 - 05:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i doubt you will be able to get the element out even if the housing is short enough to clear the muffler. i would think you would have to take the whole housing off every time. maybe there woulds be enough play inside the canister to angle the element out and around the muffler but it would have to be a pretty skinny element. i guess it might be possiable though. just would hate to spend all that dough and have it not work,
Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Tuesday, February 20, 2007 - 06:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

K+N177 is a very good filter.

The nut welded on the bottom is a really useful feature when it comes time to change it out.

:
sss


On the other hand....................

Seems like I just can not stop fooling around with my Buell.



I am thinking that my oil seems to get pretty dirty, pretty quickly, and perhaps could use better filtering.

The KN-177 as well as the Buell filters are just about the smallest filters currently produced.

I am looking at the following alternatives which have larger filtering units than the stock filter.

If I remember properly, there is quite a bit of free space under the oil filter.

1. The Purolator PL 14476. This filter is the same size as the Buell unit and the KN 177, but has a larger and finer filtering element.

2. The Purolator PL 14477 is about an inch or so longer than the stock unit. Not sure if it will fit, but I think it will.

3. The CM 25-262 discussed above.

4. The CM 25-462 this unit is 6 1/4" inches long. It adds about 4 oz. of oil to the system, and a much larger filter. Not sure if it will fit.

I will check my bike in the next few days, ( it is in a friends heated garage instead of under my back porch), and report back.
Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Tuesday, February 20, 2007 - 06:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Jon, please keep us updated. I'm interested in that as well. 8 microns is pretty darn good filtering.
Top of pagePrevious messageNext messageBottom of page Link to this message

Reepicheep
Posted on Tuesday, February 20, 2007 - 08:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

My M2 was much happier with the FL1A, which fit fine, and gave more oil capacity.

One note.. the heavier filter will spin off easier, so throw a hose clamp and some safety wire on there if you go that route. Don't ask me how I know this :/
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration