Author |
Message |
Zenerix
| Posted on Tuesday, June 18, 2013 - 07:22 pm: |
|
Hey Blasters, I am looking for replacement fork tubes. In my hasty inspection of the bike I didn't notice the tubes were bent back slightly, as if it had run head on into something. I have been told about Frank's Maintenance and Engineering and plan on giving them a call but wanted to also post up here to see if I could locate some. Thanks! |
Gearheaderiko
| Posted on Tuesday, June 18, 2013 - 09:28 pm: |
|
They do come up on eBay on a regular basis. If you see someone selling a lot of Blast parts, contact them to see if they still have the forks. Have you checked Buell/HD for replacements? PS Franks (who've been around for ever) can make your tubes in a custom length. Which means you can add an inch or 2 to mount clip-on handlebars above the top fork clamp instead of below! |
Heater1984
| Posted on Wednesday, June 19, 2013 - 03:26 pm: |
|
Is this the Frank of whom who are speaking of? lol http://www.frankmain.qpg.com/ Frank's Maintenance and Engineering, Inc. 945 Pitner Avenue Evanston, IL 60202 For more information, please call the office at 847-475-1003 We manufacture motorcycle fork-tubes. We carry past models from the 1950s through today's models. We stock over and under and stock lengths. There is no other after-market manufacturer of German, Spanish, or Japanese fork-tubes. We will ship worldwide. Established 1966 Family Owned and Operated |
Gearheaderiko
| Posted on Wednesday, June 19, 2013 - 05:25 pm: |
|
Thats the one! |
|