Author |
Message |
Carlost
| Posted on Thursday, September 14, 2006 - 06:25 pm: |
|
it handles very different, almost like a rolling pin changing direction, it took more effort to turn Yeah...usually we DOWNSIZE tires to get quicker steering...you didn't get the memo? |
Swampy
| Posted on Thursday, September 14, 2006 - 09:41 pm: |
|
The bigger tires were for mileage...... Jugallo94, thats the tire we changed to after the May ride. The Big Kid must have gotten some miles out of it as he swears he didn't do "Any" burnouts. I wish I had recorded the mileage. Those chicken strips happen on the Big Kids Blast because he rides it back and forth to college. I haven't had any problems with release agent "Yet" because I wash and scrubb the tire with lots of soap after I mount it. How do you think they do it at the track when they mount a new tire? |
Ezblast
| Posted on Friday, September 15, 2006 - 12:17 am: |
|
I just commute a week to work - does it for me - lol - too busy riding :0) GT - JBOTDS! EZ |
Carlost
| Posted on Friday, September 15, 2006 - 11:11 am: |
|
The bigger tires were for mileage... Oh...OK...now trying to justify the big donuts |
Jprovo
| Posted on Friday, September 15, 2006 - 01:47 pm: |
|
Swampy - Round here we just put a few laps on em to scrub em in... |
Kimbo
| Posted on Saturday, September 16, 2006 - 09:04 am: |
|
tech questions: neutral light is out and the stand will cut the engine when i lower it. are these two issues related? also, is it technically challenging to install an aftermarket exhaust system? thanks! |
Xgecko
| Posted on Saturday, September 16, 2006 - 04:23 pm: |
|
aftermarket exhausts are pretty easy just pay real close attention to your exhaust header stud torque, get a new header gasket, keep the stock mounting hardware for the front of the exhaust and follow the directions closely for alignment. |
Ezblast
| Posted on Saturday, September 16, 2006 - 07:48 pm: |
|
If bike is not in neutral and kick stand is down - bike will cut off. GT - JBOTDS! EZ |
Mabueller
| Posted on Monday, September 18, 2006 - 07:52 pm: |
|
So Swampy, what do you and the Big Kid think of the new Stryke'rs? |
Swampy
| Posted on Monday, September 18, 2006 - 09:46 pm: |
|
Well I have both the big Vyper Strykes on the Little Kids Blast. I have driven it a bit and like it. It handles well. The Big Kids Blast has a wheel bearing problem I am trying to reconcile. The Big Kids Blast has less clearance between the tire and swing arm and I did some modifying on it tonight, as I am waiting for the Loctite on the bearing to cure. I am going to get another wheel from Jugallo94 next week if this Loctite doesn't cure. |
Swampy
| Posted on Monday, September 18, 2006 - 09:48 pm: |
|
On the other hand the Vyper Strykes don't seem to be wearing as well as the Avon AM 51-52 |
Ezblast
| Posted on Monday, September 18, 2006 - 10:23 pm: |
|
Mine still look solid, however, they still have less than a thousand on the Black, lol - busy working on the red and maintenance on the Black - clutch adjustment, etc., still - the red bike with the Joto/Laverda bars now feels much more simular to my black bike - the bar heights almost the same, the Joto bars are longer by about 11/2" each side - still no biggie and at the angle I'm using them - very comfey though now they are at top of the light glass vs almost top of the fairing - bairly clearance to lock - will probably get a second oversized set in November for the red - I really like their handling as well! GT - JBOTDS! EZ (Message edited by ezblast on September 18, 2006) |
Swampy
| Posted on Friday, September 22, 2006 - 10:22 pm: |
|
I have the coolest doctor, He has ridden a motorcycle since he was 16, not because he is cool but because of economic reasons and not wanting to waste resources. At age 46?, he still rides every day if there isn't ice and too much snow on the road. He rides a non descript old Suzuki or Yamaha. And today, in Michigans nasty weather, when I thought I was going to be the only person out on a motorcycle, his bike is already parked at the office. This is a guy that coaches his kids basketball team and holds a free clinic on Saturdays. When I grow up, I want to be like him. |
Ezblast
| Posted on Saturday, September 23, 2006 - 03:14 pm: |
|
Sounds like a great guy! GT - JBOTDS! EZ |
Mabueller
| Posted on Sunday, September 24, 2006 - 01:11 am: |
|
>When I grow up, I want to be like him. Concur! |
Ezblast
| Posted on Wednesday, September 27, 2006 - 12:52 pm: |
|
I Re-wrote the airbox mod for usage with a K&N, either this mod or the radical final airbox mod, that deletes conventional filters, going with a stack filter on the venturi and the outer filter wall area facing the carb cut out are the two I would recommend to anybody wanting to keep reliability as well. Except for folks looking for all out performance - then I would recommend my stack/filter/springs set up instead. Enjoy! GT - JBOTDS! EZ |
Evil_mean_wicked_and_nasty
| Posted on Wednesday, September 27, 2006 - 05:45 pm: |
|
Hello everyone! I'm new to this site and I just thought that I would say hey....so Hey! |
Ezblast
| Posted on Wednesday, September 27, 2006 - 07:25 pm: |
|
Welcome! |
Buellistic
| Posted on Wednesday, September 27, 2006 - 07:33 pm: |
|
Ezblast: IMHO the "STOCK" Air Box properly PRODUCT IMPROVED is better than the Factory Race air filter kit(just another bolt on) !!! In BLASTing LaFayette |
Ezblast
| Posted on Wednesday, September 27, 2006 - 07:38 pm: |
|
Sure is a lot more reliable - thats for sure - the Pro-series Intake and the stock Intake Manifold Coupler are definately not made for each other - lol - however, my stacks are doing real well, though, I may test out different hoses again, when I'm done with my suspension mods - lol - I just don't trust that lame rubber piece - though the coupler on my Black bike has over 6,000 miles on it so far. lol GT - JBOTDS! EZ |
Swampy
| Posted on Wednesday, September 27, 2006 - 09:45 pm: |
|
Welcome to the board! Evil Mean Wicked and Nasty! |
Vortec57
| Posted on Wednesday, September 27, 2006 - 11:12 pm: |
|
EZ. my fuel filler neck mod has been a DREAM. Haven't had a lick of trouble with it in 300 miles now. Its almost rigid enough to go without the bracket and springs, but I'm not wanting to chance a good thing. SOMEDAY I'll get some free time and put up a pic of my setup now. |
Ezblast
| Posted on Wednesday, September 27, 2006 - 11:28 pm: |
|
My next test item is going to be heavy duty clamps and re-enforced (with wire as well as fiber) racing fillerneck hose, and my springs - lol GT - JBOTDS! EZ |
Wsplrll
| Posted on Thursday, September 28, 2006 - 12:45 pm: |
|
"I Re-wrote the airbox mod for usage with a K&N, either this mod or the radical final airbox mod, that deletes conventional filters, going with a stack filter on the venturi ......" Hey EZ - did you rewrite this recently ???? Where is it located ? Thanks |
Ezblast
| Posted on Thursday, September 28, 2006 - 12:57 pm: |
|
http://www.badweatherbikers.com/buell/messages/20164/32389.html?1110205394 Enjoy! |
Rex
| Posted on Friday, September 29, 2006 - 02:49 pm: |
|
American Sport bike Night / October 2 nd 5:00 pm. Set-up of room and parking lot. Meet and greet. 6:00 pm. Opening of the meeting. Woz! 6:05 pm. Welcome all new attendees. 6:10 pm. Bonneville Celebration report. 2006 Woz. Curt, Fred, Diana, Jim, Terry, Rex, Others. 6:35 pm. Update from Jon and Rex on 2006. November Meeting. Italian Bike Night. December Meeting. Our Anniversary! 8 years, going on 9! 6:45 pm. Update from Jon and Rex on 2007. January. Hill climbing and Dakar preview. February. Dealers night. March. Performance and Parts Suppliers night. April. Dakar report. Buell Ride Report Night. May. Flat Track night. June. Vintage Bike Night. July. British Bike Night. August. New Buell Model night. Laguna Seca update. September. Italian Bike Night. October. Bonneville Report Night. November. Motor Clothes and Apparel night. December. Anniversary Night. Starting our 10th year! 7:00 pm. ASBN teams. Jon and Rex. 7:10 pm. Update from the Floor. 7:15 pm. Door Prize Drawings. 7:20 pm. Dismiss, Kick tires, clean up. 7:45 till 8 pm. Anniversary committee meeting. |
Ezblast
| Posted on Friday, September 29, 2006 - 03:38 pm: |
|
Will be there! Anybody else? GT - JBOTDS! EZ |
Gearheaderiko
| Posted on Monday, October 02, 2006 - 04:49 am: |
|
I'll be there, Saturday afternoon! |
Ezblast
| Posted on Tuesday, October 03, 2006 - 03:38 pm: |
|
LOL - got to see Terry's bike up close and personal last nite! Very nice - and he os running my intake with a 1/4" adapter for the Mikuni - lol - he figures if he'd just geared a tad lower he would have got around 140mphs, as it is he set two records in the 650cc singles classes, and he plans to do the 730cc Millinium kit to enter the 750cc catagory and go 150 plus mphs! - very nice indeed! A note - any Blastards wanting to go to the American Sport Bike BBQ and live in Northern Cali area - join me at 43rd ave and Vicente in SF at 9am Fri - if you show early coffee and stuff will be served - I'll be taking the Coastal route via 1. GT - JBOTDS! EZ (Message edited by ezblast on October 03, 2006) |
Vortec57
| Posted on Wednesday, October 04, 2006 - 09:24 pm: |
|
Can someone tell me where I can find the online service manual? I got my rocker box gaskets on order. When I put them in I hope to do the rest of the 1,000 mile service. Thanks |