| Author |
Message |
   
Smoke
| | Posted on Thursday, March 11, 2010 - 06:41 pm: |
|
unfortunately i will also not be able to attend not March Badness this year. i will be prepping for Jennings on the 3rd of Apr. i will miss y'alls company for sure. have fun and be careful! tim |
   
Stealthxb
| | Posted on Thursday, March 11, 2010 - 09:20 pm: |
|
Hi everyone, Just wanted to let you know that the screening times for "Pushin' Up Daisies" have been scheduled. The location is going to be at the Landmark Midtown Art Cinema. Screening times, venue address, and contact info are below. I have to admit we have about the best screening times we could have asked for. We're very lucky to have these spots. As far as I know, the films and festival schedule have not yet been announced on the festival website, so tickets to individual screenings are not yet on sale. Keep an eye out. Hope you can make it. Also, if you go to our website (www.iamnotazombie.com), there is a link where you can join us on FaceBook and help us start spreading the word. We are continuing to make updates to the website as we go along. We would like to ask that if any of you have any really great photos from the production, we would love for you to post them on FaceBook. We're trying to collect as many good shots as we can. Thanks everyone! Here's the info: Friday, April 16 at 7:30 PM Saturday, April 17 at 11:45 PM Landmark Midtown Art Cinema 931 Monroe Drive Northeast Atlanta, GA 30308 Patrick Franklin |
   
Ratyson
| | Posted on Friday, March 12, 2010 - 09:57 am: |
|
Hey Charlie, or anyone else familiar with car suspension: What would cause one corner of a car to become 3/4" lower than the rest? The suspension place that I brought the WRX to said that they saw no evidence of broken/damaged springs, joints, or shocks. But they did verify that the rear right is 3/4" lower than the rest, which explains the car's tendency to pull to the right. |
   
New12r
| | Posted on Friday, March 12, 2010 - 12:22 pm: |
|
I would measure the coil springs left to right. You may have one that is sagging. Also checking the strut off the spring you may find the strut is bad. |
   
Ratyson
| | Posted on Friday, March 12, 2010 - 03:13 pm: |
|
I'll try to check that, thanks! Do you mean to check the width of the spring and compare it to the others? I may have to bring it in to a shop to have them check the strut though. |
   
Buellish
| | Posted on Friday, March 12, 2010 - 03:59 pm: |
|
I would think Charlie was talking about length.I would compare length from side to side as the springs may be different lengths,diameters and spring rates,from front to rear. (Message edited by buellish on March 12, 2010) |
   
New12r
| | Posted on Friday, March 12, 2010 - 04:08 pm: |
|
Thanks Mike! |
   
Stealthxb
| | Posted on Saturday, March 13, 2010 - 03:12 pm: |
|
I had a great time last night. Thanks to all who showed up. Those that did not make it were missed. |
   
Fran_dog
| | Posted on Saturday, March 13, 2010 - 09:55 pm: |
|
Great to see you Travis. Good luck with your future endeavors. Thanks for have everyone over Charlie and Sam And to great to see everyone. |
   
Shred
| | Posted on Sunday, March 14, 2010 - 03:18 am: |
|
Follow the white rabbit.... |
   
Buellish
| | Posted on Sunday, March 14, 2010 - 12:51 pm: |
|
"Follow the white rabbit...." What,there's no Yellow brick road? |
   
Shred
| | Posted on Sunday, March 14, 2010 - 09:20 pm: |
|
I get silly at 3am, was up tearing down the Buell, jacked up on jova |
   
Ratyson
| | Posted on Tuesday, March 16, 2010 - 11:34 am: |
|
I would compare length from side to side as the springs may be different lengths,diameters and spring rates,from front to rear. Gotcha. I am also going to check the upper mount to make sure something isn't giving there.} |
|