G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through May 20, 2009 » Has anyone installed Clubman bars on a Lightning? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Tpoppa
Posted on Sunday, May 17, 2009 - 09:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

?
Top of pagePrevious messageNext messageBottom of page Link to this message

Andymnelson
Posted on Sunday, May 17, 2009 - 10:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

http://tinyurl.com/ouux9b
Top of pagePrevious messageNext messageBottom of page Link to this message

Cityxslicker
Posted on Sunday, May 17, 2009 - 11:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

yep, Danno did, If I remember correctly he also has the big headlight on it from an M2, damn thing looks like its ready to go hunt and kill Thruxtons. I will try and get him to post pics
Top of pagePrevious messageNext messageBottom of page Link to this message

Jraice
Posted on Monday, May 18, 2009 - 12:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Seen a few adjustable clubmans on the lightning...
Top of pagePrevious messageNext messageBottom of page Link to this message

Tpoppa
Posted on Monday, May 18, 2009 - 12:07 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

yep, Danno did, If I remember correctly he also has the big headlight on it from an M2, damn thing looks like its ready to go hunt and kill Thruxtons. I will try and get him to post pics

Do you know if he was able to retain the stock cables?
Top of pagePrevious messageNext messageBottom of page Link to this message

Jraice
Posted on Monday, May 18, 2009 - 12:11 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I was barely able to make the stock cables fit with my super wide pro-taper bars with a few tweaks, I would imagine clubmans, being so compact to the bike, would also be fine.

Just a guess though.
Top of pagePrevious messageNext messageBottom of page Link to this message

Pogue_mahone
Posted on Monday, May 18, 2009 - 01:29 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

ok i have heard the term...somebody help an old man out--what are clubman bars?
thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Jraice
Posted on Monday, May 18, 2009 - 01:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

http://lmgtfy.com/?q=clubman+bars
Top of pagePrevious messageNext messageBottom of page Link to this message

Jraice
Posted on Monday, May 18, 2009 - 01:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Sorry ; )...

Just found out about this fun thing today and had to use it!
Top of pagePrevious messageNext messageBottom of page Link to this message

Pogue_mahone
Posted on Monday, May 18, 2009 - 02:01 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

ok smart axe
why be they called clubman?
i axed you a question !!
hahahahahaha


scott
Top of pagePrevious messageNext messageBottom of page Link to this message

Jraice
Posted on Monday, May 18, 2009 - 02:09 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

No idea : p.

Probably something to do with the cafe racer scene as thats where the bars originated from I believe.
Top of pagePrevious messageNext messageBottom of page Link to this message

Calimari
Posted on Monday, May 18, 2009 - 02:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I have Clubman bars, didn't have to change cables but had to get creative with routing them. The angles are hard to work with.

Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Monday, May 18, 2009 - 10:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

At the dire risk of offending some long time members who are perhaps tiring of looking at pictures of my handlebars, I will repost these which show vintage Tomaselli Adjustable handle bars mounted on my 2004 Buell XB12 SR Lightning.

Kindly note the custom made risers and mounting plate which allow the handle bars to be raised so that the stock cables can still be used, and which makes them easier for this senior street fighter to ride.


sss

sss


ddd
Top of pagePrevious messageNext messageBottom of page Link to this message

Swordsman
Posted on Monday, May 18, 2009 - 10:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Those top risers are SWEET! Who makes them?

The bottom risers, not so much.

~SM
Top of pagePrevious messageNext messageBottom of page Link to this message

Chippy
Posted on Monday, May 18, 2009 - 10:45 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Are your bars essentially in the same position as stock with risers like that, maybe just a bit more backsweep?
Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Monday, May 18, 2009 - 10:54 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks Sword.

The bottom risers are just stacked handlebar clamps that I used as a test rig, adding one at a time until I could get everything lined up.

The top risers are a set of Joker Machine risers that were made for a Honda Fifty off road bike years ago. No longer made.

I got them on eBay after searching for about a year, then had Andy, my local machinist/genius, age 78, modify them, and build the base plate to my design.

I am afraid to add up how much money I spent on these handlebars, but what with the risers, the Tomaselli's , the CRG levers, the remote brake reservoir, the traction grips and the mirror, it's very likely north of five hundred bucks.

And that doesn't include a dime for my labor. Considering that a set of bars like this includes over twenty different pieces, believe me, I wouldn't have wanted to pay for the time.

But then, nothin's too good for my Lil' Blackie, am I right?

Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Monday, May 18, 2009 - 02:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Chip -

Not exactly.

Compared to the stock Lightning bars, the Tomasselli's sweep much more sharply down, and aft.

Close your eyes, and hold your arms in front of you in a relaxed position.

Then open your eyes, you will very likely find that your arms are at about a 45º angle and swept back.

Very much like the position of these bars.

The advantage of that, is that the arm muscles are virtually totally relaxed when the bike is underway, reducing the unwanted inputs from the body to the bars.

Make any sense?

Top of pagePrevious messageNext messageBottom of page Link to this message

Ustorque
Posted on Tuesday, May 19, 2009 - 04:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

chippy some day you and i will swap bikes, and you can try em out.



Top of pagePrevious messageNext messageBottom of page Link to this message

Swordsman
Posted on Tuesday, May 19, 2009 - 04:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Threadjack: Ustorque, is that the Kick Ash air box you have there? If so, they're REALLY making them darker now. Mine's almost totally opaque.

~SM
Top of pagePrevious messageNext messageBottom of page Link to this message

Ustorque
Posted on Tuesday, May 19, 2009 - 05:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

it is stock kick ash airbox off my '06, i think it's just the pic cause it's pretty clear in person.

(Message edited by ustorque on May 19, 2009)
Top of pagePrevious messageNext messageBottom of page Link to this message

Old_man
Posted on Tuesday, May 19, 2009 - 05:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

They were made to fasten to a bike with standard bars, to approximate the look and feel of clip-on bars.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ezblast
Posted on Wednesday, May 20, 2009 - 01:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Anyone running Jota/Laverda Bars?
Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Wednesday, May 20, 2009 - 07:37 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I ran Jota Laverda bars on Ol' Yaller, my XB9S.

They were not that great, and were only brazed together, so they came apart in a crash, or even in the trailer.

They were pretty cool though, and are much better than current replica's which do not fit on a Buell, and are not nearly as well made as the original.


nn


I ran them upside down compared to the original Laverda installation. I think I may still have them, but they need to be rebuilt.


xxXx
Top of pagePrevious messageNext messageBottom of page Link to this message

Glitch
Posted on Wednesday, May 20, 2009 - 07:44 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

They were not that great, and were only brazed together, so they came apart in a crash, or even in the trailer.
O_o
I remember that.
March Badness 3?
Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Wednesday, May 20, 2009 - 08:00 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Yup.

On the way to MB3, I jackknifed my "new" trailer, sending the bike crashing to the side of the trailer and breaking the bars.

I was in Roanoake at the time, and I was really considering turning back and going home, but for some reason I did not.

When I got to TWO in Suches, Bad Webbers were all over the bike, helping me remove the bars.

We got them welded up across the street at an air conditioning shop, if I recall correctly, and I was back on the road before sunset.

Thanks guys.

Can't beat a Buelligan.

With a stick.



Thanks for remembering that Glitch.
Top of pagePrevious messageNext messageBottom of page Link to this message

Gunut75
Posted on Wednesday, May 20, 2009 - 08:50 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Those old Laverdas ROCK!!!! I want an SFC!!!!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Swordsman
Posted on Wednesday, May 20, 2009 - 09:39 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Ustorque, no, I see yours is quite transparent. I was talking about the one I just bought. It's almost completely black... you can just barely make out the servo on tiop, and maybe catch a glimpse of the filter from the right angle. Kinda' disappointed in it. But when I went to order it, the name had been changed to "Hercules" instead of "Kick Ash"... same part number. Dealer said it had a note that the part had been updated.

~SM
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration