Author |
Message |
The4ork
| Posted on Friday, June 18, 2010 - 05:56 am: |
|
hey guys... im installing my veypor gauge system, and per instructions i put the trigger wire on the coil, one side does nothing as it should, but the other "trigger" side works on the gauge, i show rpm when turning the motor over. however, when hooked up it KILLS my spark, even whith the engine running if i touch the wire to the coil it kills the engine. so where else can i get an rpm signal? sucks i already routed all the wires which took forever to do really nice. |
Hybridmomentspass
| Posted on Friday, June 18, 2010 - 06:04 am: |
|
RPM signal can be taken off of the pink wire on the back of the tach. At least on my 99 S3 (EFI) that is where we got our signal Im using it for a DynaTek shift minder/shift light hope it helps |
The4ork
| Posted on Friday, June 18, 2010 - 09:43 pm: |
|
worked like a champ! thanks a lot for a quick accurate reply! |
|