Author |
Message |
Buell_bert
| Posted on Wednesday, May 09, 2007 - 05:38 am: |
|
I have a 2000 M2 with bars at 4in. high and can I get 98 S3T bars that should be 6in. high to raise the bars and still use all the factory clutch/brake/and anything else that makes a difference to fit without any problems? I really would like to sit more upright. Thanks for the info. A fellow new Buell owner. (Used to have 2 other Harleys) |
Buell_bert
| Posted on Thursday, May 10, 2007 - 12:36 am: |
|
Also are the 2000 Buell Blast bars the same or will do the same for me. Thank you. The S3T bars are Buell part #55873-97Y. If I can come up the 2 inches it would be great. |
Jayvee
| Posted on Friday, May 11, 2007 - 10:39 pm: |
|
Well I did put Blast bars on my M2 and after re-routing the clutch cable, everything fits back on. Sits more upright. There are some specs out there that make the Blast and S3T bars sound the same or at least very close, but it is a different part number, could just be an updated number. I think it's like 1.5" though. But you could add the 1" risers from American Sport Bike and you'd be "up where you belong" |
Buell_bert
| Posted on Saturday, May 12, 2007 - 02:27 am: |
|
Hey thanks Jayvee. I appreciate the help and I'll try it. Also I should be able to position them to the rear a little more. I'm used to a chopper but really like the Buell bike. COOL |
|