G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Archive through May 19, 2011 » Dead Buell « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Its_a_buell
Posted on Wednesday, April 06, 2011 - 10:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

First of all, I searched through the archives and couldnt find what I am looking for so here goes.
I've got an 03 XB9S that has completely died on me. It happened on a casual ride through town and it seemed like someone flipped the kill switch. Now when I switch the ignition on...nothing. No fuel pump, no head light, only the neutral light comes on and the tach&speedo needles flipping over.
All the fuses in the box are good, the battery tested good, and i can't find any obvious shorts or disconnected wires. I pulled apart the kill switch and it looks to be functioning properly.
Could someone point me in a good direction to troubleshoot. thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Danylos
Posted on Thursday, April 07, 2011 - 12:34 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I had something similar happen last year. (thought I was going to be stuck 100mi from home for the night)

Even though your fuses may all be good they may not be making good contact inside the fuse box. Try both cleaning the fuse contact points and pulling the fuses in and out several times to improve the connection. My bike came back to life after pulling and replacing each fuse several times.

Good luck!
Top of pagePrevious messageNext messageBottom of page Link to this message

Midknyte
Posted on Thursday, April 07, 2011 - 01:27 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

> I've got an 03 XB9S

kickstand sensor switch?
Top of pagePrevious messageNext messageBottom of page Link to this message

Swuly
Posted on Thursday, April 07, 2011 - 02:23 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Iīve got an 06 Uly and exactly the same thing happened to me! I proved to be the fuel pump that had been completely clogged and just died. Donīt know if 03 XB9S has got the bank angle sensor, but if so, that might also be worth checking out.
Good luck!
Top of pagePrevious messageNext messageBottom of page Link to this message

Natexlh1000
Posted on Thursday, April 07, 2011 - 06:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Measure the voltage at the battery while the key is on.
My X1 died like that and it was the battery.
With no load, the battery measured 12.5V and when connected to a charger, it said it was fully charged.

BUT when any load was applied, the battery might as well have been a chunk of wood! Voltage dropped to nothing.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brumbear
Posted on Friday, April 08, 2011 - 08:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

key switch

(Message edited by brumbear on April 08, 2011)
Top of pagePrevious messageNext messageBottom of page Link to this message

New12r
Posted on Saturday, April 09, 2011 - 10:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Are all the RELAYS clicking. My 04 12R killed relays(the gray ones) left and right.
Top of pagePrevious messageNext messageBottom of page Link to this message

Vtpeg
Posted on Sunday, April 10, 2011 - 09:30 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Connector by the drive pulley? Can't recall the name, but seems to be regular gremlin.
Top of pagePrevious messageNext messageBottom of page Link to this message

Its_a_buell
Posted on Sunday, April 10, 2011 - 10:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

thanks for all the input, i'll update as soon as i have some results.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tap_tap
Posted on Wednesday, April 13, 2011 - 02:23 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

ECM was tested on another bike and worked properly on it. Still my engine light does not come nor will the fuel pump turn on when I turn the key switch. Any other ideas ?
Top of pagePrevious messageNext messageBottom of page Link to this message

Tap_tap
Posted on Wednesday, May 04, 2011 - 02:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

It was the ignition relay switch
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration