G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through March 17, 2008 » 2003 XB9S Buzzing Plate on timing cover. « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Phwx2
Posted on Saturday, March 15, 2008 - 04:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

First ride of the year. New buzzing noise. The XB9S callout plate on the timing cover (right side)is loose in the rivets. Anyone have this? Fixed it?
Top of pagePrevious messageNext messageBottom of page Link to this message

Percyco
Posted on Saturday, March 15, 2008 - 05:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Drill out the old rivets and install new ones .

Top of pagePrevious messageNext messageBottom of page Link to this message

Twig
Posted on Saturday, March 15, 2008 - 05:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Yes, once you remove the stock plate, I think you will find a thicker plate held on by two screws on the horizontal. Might as well pick yourself a new cover!
Top of pagePrevious messageNext messageBottom of page Link to this message

Jaydub
Posted on Saturday, March 15, 2008 - 05:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

just make sure to use loctite - i didn't and my HD-Scull is somewhere on the highway (lesson learned)
Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Saturday, March 15, 2008 - 07:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)


xxXx


Once you have drilled out the old rivets, you might think about threading the rivet holes with a 10/32 tap, and using a threaded fastener such as a stainless allen head in lieu of the rivets.

Of course, adding a custom cover, such as this 1999 X1 accessory, is always a good idea.

Top of pagePrevious messageNext messageBottom of page Link to this message

Spatten1
Posted on Saturday, March 15, 2008 - 07:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Drill and tap the holes. Rivets are ridiculous.
Top of pagePrevious messageNext messageBottom of page Link to this message

Phwx2
Posted on Saturday, March 15, 2008 - 07:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks for the advice but I've decided its the only buzz I'm getting these days.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jos51700
Posted on Saturday, March 15, 2008 - 08:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Drill rivets and lose cover.

Remove cover underneath.

The electronics are watertight, and dead weight is the enemy.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration