Author |
Message |
Dhays1775
| Posted on Tuesday, November 08, 2011 - 10:17 pm: |
|
I've got a few parts that I was able to save from my wrecked 12R. List of parts are: black ZTL2 caliper, front brake line, 13mm master cylinder, Free Spirits belt tensioner, Brembo 2 piston rear brake with bracket to fit inside the swing arm with brake line. Also have a 6000K HID light with slim ballast, brand new. Lastly, a full set of yellow plastics minus the windscreen. I'm open to any reasonable offer, including shipping. Shoot me a PM. (Message edited by dhays1775 on November 08, 2011) |
Nitto12ss
| Posted on Tuesday, November 08, 2011 - 10:23 pm: |
|
How much for the tensioner? |
Mermark
| Posted on Tuesday, November 08, 2011 - 10:23 pm: |
|
interested in brembo and free spirits belt tensioner |
Dhays1775
| Posted on Tuesday, November 08, 2011 - 10:32 pm: |
|
$150 for the Brembo and a spare set of pads, including line. $75 for the tensioner. there's some wear on the back where the rear muffler straps rubbed a little. |
Nitto12ss
| Posted on Tuesday, November 08, 2011 - 10:34 pm: |
|
will take the tensioner, you have paypal? |
Mermark
| Posted on Tuesday, November 08, 2011 - 10:34 pm: |
|
ok I'll take the brembo its complete correct ? to include brake line ? |
Dhays1775
| Posted on Tuesday, November 08, 2011 - 10:34 pm: |
|
also have a select seat, just needs recovered. $100 |
Dhays1775
| Posted on Tuesday, November 08, 2011 - 10:38 pm: |
|
pfc.hays@yahoo.com for paypal. brake is complete. just pull the switch, pull the line, replace, tighten. the brembo only has about 2500 miles on the pads. gonna toss in a set of new pads too. |
Mermark
| Posted on Tuesday, November 08, 2011 - 10:40 pm: |
|
lsl is that still salvageable and whats a select seat look like, who makes it and where can i see one not to mention the drummer you had |
Dhays1775
| Posted on Tuesday, November 08, 2011 - 10:42 pm: |
|
i can post pictures of the seat in the morning. it's the touring seat. the steering damper is still good. i'm gonna pull it off tomorrow. i'll post pictures of all if needed. just let me know. the drummer has to stay on the bike. i don't have a muffler to replace it with though. if i had a garage, i'd part out the old girl. sadly, that's not the case. (Message edited by dhays1775 on November 08, 2011) |
Nitto12ss
| Posted on Tuesday, November 08, 2011 - 10:47 pm: |
|
Payment sent, thanks. Been looking for a deal on one since my last one broke at the hinge. |
Nitto12ss
| Posted on Tuesday, November 08, 2011 - 10:50 pm: |
|
Not that in interested in the muffler, but I'm sure someone would be willing to trade a stock can + cash. |
12x9sl
| Posted on Tuesday, November 08, 2011 - 11:08 pm: |
|
I'm interested in the yellow chin fairing if you decide to let the plastics go separately. |
Mermark
| Posted on Tuesday, November 08, 2011 - 11:19 pm: |
|
ok lsl drummer select seat brembo sold to me |
Dhays1775
| Posted on Tuesday, November 08, 2011 - 11:19 pm: |
|
tensioner, brembo line and pads, lsl, seat, and drummer sold. there was a small burn on the center of the chin fairing from the previous owner having improperly placing the torca clamp. it can be replaced though. |
Schwara
| Posted on Tuesday, November 08, 2011 - 11:29 pm: |
|
PM sent |
Baal
| Posted on Tuesday, November 08, 2011 - 11:57 pm: |
|
Nitto12ss is a reprobate and an unsavory character. You should sell the tensioner to me instead of him. |
Nitto12ss
| Posted on Wednesday, November 09, 2011 - 12:29 am: |
|
Thanks Baal, but you know it will look better on my bike :-) |
Dhays1775
| Posted on Wednesday, November 09, 2011 - 12:33 am: |
|
Baal, Nitto already paid.
|
Wolfo68
| Posted on Wednesday, November 09, 2011 - 09:25 am: |
|
what kind of damper is it and how much were you thinking? |
No_rice
| Posted on Wednesday, November 09, 2011 - 12:21 pm: |
|
pm sent on plastics and ztl2 setup |
Dhays1775
| Posted on Wednesday, November 09, 2011 - 03:09 pm: |
|
Everything is pretty much spoken for. Those that have PM'd me, responses sent. I will do my best to keep everyone in the loop as much as possible. Thanks guys. I'd much rather post stuff here than fleabay. Y'all are awesome. |
Dhays1775
| Posted on Wednesday, November 09, 2011 - 03:56 pm: |
|
Oh yeah, I forgot about the axle sliders. Front and rear. A couple soft scratches on the rear, but almost undetectible. Only had em for about 2 weeks. They're the hard plastic kind, black in color. $50 shipped. |
Deanh8
| Posted on Wednesday, November 09, 2011 - 06:25 pm: |
|
How much for 8 piston line and master? |
Dhays1775
| Posted on Wednesday, November 09, 2011 - 07:36 pm: |
|
Dean, there's a few guys ahead of you. Also, snagged a few more things from the bike. Carbon fiber heel guards, rider and passenger. Right side scoop, also carbon fiber. |
Dhays1775
| Posted on Wednesday, November 09, 2011 - 07:42 pm: |
|
Oh yeah, also have a spare belt, top end cometic gasket set, and oil filter. |
Dhays1775
| Posted on Wednesday, November 09, 2011 - 08:17 pm: |
|
Almost forgot, ECMspy and cable. $40 |
Starwolve
| Posted on Thursday, November 10, 2011 - 08:43 am: |
|
Dhays1775 - I'm interested in the ECMspy and cable. Sending you a PM. |
Dhays1775
| Posted on Thursday, November 10, 2011 - 04:50 pm: |
|
Scoop and sliders are spoken for. |
Merc16
| Posted on Saturday, November 12, 2011 - 09:37 pm: |
|
How much top end cometic gasket set and oil filter ? |
|