Author |
Message |
Markymark
| Posted on Sunday, August 22, 2004 - 01:10 pm: |
|
Went to change the trans oil on the Blast today and upon installing the cover with a torque wrench, pulled the threads out. Anyone else had this problem and if so what kind of repair did you use? |
Ezblast
| Posted on Sunday, August 22, 2004 - 02:48 pm: |
|
Be carefull doing it, however, in the regular KV I read of this happening, and it was sugested that you could helicoil it. Browse the regular KV section and you'll find it. Hope that helps! GT - JBOTDS! EZ |
Markymark
| Posted on Sunday, August 22, 2004 - 05:14 pm: |
|
Went ahead and installed a heli-coil. |
|