Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Tq_freak
| Posted on Thursday, April 23, 2015 - 10:15 am: |
|
This build (as well as several others) makes me lust for a tuber. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Thursday, April 23, 2015 - 06:06 pm: |
|
Correct purpony. And the ride hieght is lower but I need to set the rear suspension it is at its lightest currently so that will shrink it some. I never measured the distance when I started so all I could do is go off what I got above from a member It could be off also as my assistant could have had the tape in the wrong area. Anyone out there want to double check center to center on a 96 S1 and a 99 X1 Ceejay you were building yours during Joes right? did you ever get it done would love to see a pic or two. Thanks for the great comments its taken alot of work. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Friday, April 24, 2015 - 09:54 pm: |
|
Bonus came in a parts buing I am doing Whoo battery, belt, brake pads, Gauges, rotors, and much more |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Sunday, April 26, 2015 - 07:53 am: |
|
Got a lot acomplished yesterday fixed the exhaust studs completed exhaust install, Finished kick stand, and odered all the rst of the parts just have the custom Brake lines to order. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Sunday, April 26, 2015 - 07:43 pm: |
|
![](http://i1148.photobucket.com/albums/o578/s1owner/The%20ValHala/646AB1E4-E441-479A-ADD5-C1991AA21A00_zpsywwhftku.jpg) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
D_adams
| Posted on Sunday, April 26, 2015 - 08:01 pm: |
|
Hey Ken, I just realized you can just put a 2" spacer on the Z bracket with a longer bolt and nylock nut with the 2nd band bracket/clamp to support the muffler. Might save some time & aggravation trying to bend that 1/8" plate I sent along. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Sunday, April 26, 2015 - 10:45 pm: |
|
Well the way it is looking it lines up with the rear outside mount should be able to make it work! |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
D_adams
| Posted on Monday, April 27, 2015 - 12:51 pm: |
|
I'm having some 2" aluminum spacers made today, send me your mailing address again and I'll shoot one your way. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Monday, April 27, 2015 - 01:21 pm: |
|
Pm sent with the info Dean Thanks |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Wednesday, April 29, 2015 - 06:52 am: |
|
dean did you get my pm with the address? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
D_adams
| Posted on Wednesday, April 29, 2015 - 09:10 am: |
|
Yeah, showed up late last night. I'll get the spacer out today if I can. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Wednesday, April 29, 2015 - 10:04 pm: |
|
Fabed the turn signal/mirrors
![](http://i1148.photobucket.com/albums/o578/s1owner/The%20ValHala/D46AEFA5-7594-4B38-AB71-0179171E7B5C_zpszp2yehqx.jpg) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Dschmidt54
| Posted on Thursday, April 30, 2015 - 09:47 am: |
|
ooohhh I'm keeping up on this thread. Exactly what i wanted to do to my x1. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Phelan
| Posted on Thursday, April 30, 2015 - 01:45 pm: |
|
I like those bar end signals. Zack put those on his 1190RS. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Jayvee
| Posted on Thursday, April 30, 2015 - 01:47 pm: |
|
great idea ! |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Thursday, April 30, 2015 - 09:36 pm: |
|
Nice thing about the mirrors is if the glass breaks they are 2 bucks at the auto store. Dschmidt beware if you go this route make sure you fully read the links for Joes Buell and Ceejays and this one. You must have a machinst or be one and be ready to fabricate alot of stuff. And realize it is alot I mean alot of work I will have 2 yrs into it when complete and I dont even want to know the $$$ For all to do this be sure you are commited otherwise you will destroy a Buell for no reason. FYI my original frame is sitting on a shelf of a fellow badwebber to be brought back to life as stock so it will live again. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Ft_bstrd
| Posted on Thursday, April 30, 2015 - 09:44 pm: |
|
Yeah, I couldn't do what you are doing. My modifications are all bolt-ons for that very reason. I just don't have the skill. I can do righty tighty, lefty loosey. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
K12pilot
| Posted on Thursday, April 30, 2015 - 09:47 pm: |
|
^^^^^^^AMEN to that Ken!!! Looks great!! |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Saturday, May 02, 2015 - 07:47 pm: |
|
Been working hard on this part still having issues but you get the idea. The seat on here is not what will be there it will have an Aluminum cafe back with all the electronics.
![](http://i1148.photobucket.com/albums/o578/s1owner/The%20ValHala/7184EAE6-9A80-4215-B6E9-0BD40BC2F588_zps39ry5bdp.jpg) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Loose1
| Posted on Saturday, May 02, 2015 - 09:10 pm: |
|
Nice job on the tail. I'm building a new one for my xb so I know what you're doing, first hand. Matt |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Ft_bstrd
| Posted on Monday, May 04, 2015 - 10:18 am: |
|
Looks nice. What is the mock up seat? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Monday, May 04, 2015 - 10:48 am: |
|
Seat is a shaved and shaped X1 seat |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Ft_bstrd
| Posted on Monday, May 04, 2015 - 11:44 am: |
|
Gotcha. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Wednesday, May 06, 2015 - 03:48 pm: |
|
The more I look at this hoop design I dont like it looks too fat in the back like a big wasp tail. Think I will make a new hoop sim to this pic
![](http://i1148.photobucket.com/albums/o578/s1owner/A995E555-88E0-408C-B06E-B57F9EB70FEC_zpsxzkse9ej.jpg) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Wednesday, May 06, 2015 - 03:50 pm: |
|
On another note got goodies to finish New brake pads front and rear Custom brake lines Gas gauge Fittings Belt Rotors And much more!
![](http://i1148.photobucket.com/albums/o578/s1owner/The%20ValHala/B2D32D70-FBA0-40D4-BD74-4EB7125A7AD1_zpstvrk8ttu.jpg) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Wednesday, May 06, 2015 - 07:47 pm: |
|
Fyi to anyone interested just ordered a custom engraved timing cover for pretty cheap if anyone is interested pm me I will hook you up with the contact |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Ft_bstrd
| Posted on Wednesday, May 06, 2015 - 09:13 pm: |
|
I'm interested. Are PMs working again? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Wednesday, May 06, 2015 - 11:06 pm: |
|
I guess well see PM sent |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Ceejay
| Posted on Saturday, May 09, 2015 - 09:21 pm: |
|
from earlier - no I didn't get mine finished - life got in the way - all of which were good things except for finishing a bike project. So shelved it and never got back to it. I had it standing on it's own and for the most part ready to start the finish work, but with work, kids, and money... I'd like to give it another go with a few tweaks, because it is such a cool thing as witnessed by Jodie's and how well your's is moving along, but I doubt I'll get back to it anytime soon. Like you stated earlier, it's not a cheap nor simple endeavor, and gets even tough now that I don't have a machine shop or welding set-up at my disposal. Looking good on your end, enjoy. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
S1owner
| Posted on Saturday, May 09, 2015 - 10:42 pm: |
|
Ceejay I know exactly what you mean I had to wait till the kids were grown to do all this and my life was solid. |