| Author | Message | ||
     Andros |
How do you remove these? | ||
| Kttemplar |
Just pull them off gently and the backing should stay on the reflector. They are held on with adhesive. Mike | ||
| Andros |
Thank you! | ||
| Ekruizenga |
helps if they are warm, same for the stickers | ||
| Zac4mac |
True dat - use a hair dryer to slowly and gently warm them. Once you get an edge up, aim the hot air at the adhesive, it will speed up release. Z | ||
| Xbswede |
If you twist them instead of trying to pry them off, they will pop off real easy. | ||
| Geforce |
I wouldn't worry about the adhesive to much, you can buy a new double sided adhesive pad from 3M if you need to re-apply them. I took the ones off my 11 and the woman's scg with a string to lift the edge and then a couple of side to side twists. Good luck! | ||
| Duggram |
It was >100 degrees at the track and I just put a big flat blade screwdriver behind it, gave it a twist they came right off with no damage. | ||
| Hootowl |
WD-40 will remove any residual stickiness. | ||
| Geforce |
Isn't WD-40 amazing? I put it on my waffles too! | ||
| Zac4mac |
When I first met my wife, she smelled of gasoline and WD-40. Love at first sight/smell. I'm a gearhead. Z | ||
| Spectrum |
I find it amazing that a thread about reflectors has reached a dozen posts. I think we all need help!  | ||
| Ridenusa4l |
Zac, YOUR A LUCKY MAN!!  Jake | ||
| Usmoto |
I'm with you Spectrum Let's all "reflect" on how that could happen.  I know, I'm not right... |
