Author |
Message |
Hogzilla
| Posted on Thursday, January 21, 2010 - 04:06 pm: |
|
Sorry if this is a repeat. What size bulbs go into the rear turn signals. All I can find are the HD/Buell part numbers. Thanks! |
No_rice
| Posted on Thursday, January 21, 2010 - 04:11 pm: |
|
i thought they were an led circuit board?? but what do i know ive never even made mine blink before they got taken off |
Boogiman1981
| Posted on Thursday, January 21, 2010 - 04:19 pm: |
|
yup surface mounted led's three i think |
Hogzilla
| Posted on Thursday, January 21, 2010 - 04:30 pm: |
|
I'll look again tonight. Could have sworn the rear turn signals were halogens. Manual shows 10 watt with a part number of Y0042.K. I want to put red LEDs or a red halogen in and with the Kisan tailBlazer turn the tail light and turn signals into brake/running lights. |
Lastonetherebuys
| Posted on Thursday, January 21, 2010 - 04:33 pm: |
|
they most deff are an LED board in there. If you want to go red there are tons of better aftermarket bulbs out there |
Avc8130
| Posted on Thursday, January 21, 2010 - 04:33 pm: |
|
If he has a 2010 it would be a bulb... ac |
Hogzilla
| Posted on Thursday, January 21, 2010 - 04:42 pm: |
|
Sorry guys, Avc8130 made a good observation. I have a 2010. |
No_rice
| Posted on Thursday, January 21, 2010 - 05:45 pm: |
|
hmm, they back tracked from led to bulb? didnt notice that... (Message edited by no_rice on January 21, 2010) |
Hogzilla
| Posted on Thursday, January 21, 2010 - 05:50 pm: |
|
Yeah, they did a swap, bulb tail light to LED, and LED turn signals for bulb. Go figure. |
Ratbuell
| Posted on Thursday, January 21, 2010 - 09:26 pm: |
|
Just get OEM '09 LED signals. They got the bugs worked out after the '08s; replacements and '09s work just fine. |
Moosestang
| Posted on Thursday, January 21, 2010 - 09:34 pm: |
|
Just get some aftermarket led signals. |
Mountainstorm
| Posted on Saturday, January 23, 2010 - 12:20 pm: |
|
Have you checked the blinker fluid? The Buell techs didn't fill mine and luckily I noticed before it burned out the bulb. |
Hogzilla
| Posted on Saturday, January 23, 2010 - 01:16 pm: |
|
They filled it with Genuine Harley Davidson Synthetic Blinker FluidŽ. I don't want premature wear on my blinkers. |
Milt
| Posted on Saturday, January 23, 2010 - 04:09 pm: |
|
According the shop manual, you have to rotate the engine to get to the blinker fluid reservoir. |
Zac4mac
| Posted on Saturday, January 23, 2010 - 09:17 pm: |
|
I would think you'd need a ballast resistor to use the LEDs on a 2010 model. AFAIK the only difference in a 2009 and a 2010 IC is the flasher drivers. Z |
Henessey
| Posted on Friday, August 26, 2011 - 12:44 pm: |
|
The part # for the 2010 turn signal bulb is Y0042.7AA Amber RY10W |