Author |
Message |
Jkgonzo
| Posted on Saturday, April 18, 2015 - 03:40 pm: |
|
What is the front motor mount, 2 bolts to head torque? I know the front isolator bolt is 100-110 ft/lbs. Also, locktite on any of these three?? I see nothing indicated in the manual........ Thanks.......jim |
D_adams
| Posted on Saturday, April 18, 2015 - 03:49 pm: |
|
Front isolator to cylinder head bolt, 73-78 ft/lbs Isolator bolt, front, 100-110 ft/lbs Isolator bolts, side, 100-110 ft/lbs 262 red loctite on them all. |
S1owner
| Posted on Saturday, April 18, 2015 - 03:49 pm: |
|
Download the 97 S1 manual from the knowledge vault it will give you the specs make sure you are using new bolts these bolts are not to be reused!!!!!! |
Jkgonzo
| Posted on Sunday, April 19, 2015 - 05:37 am: |
|
Front isolator to cylinder head bolt, 73-78 ft/lbs Isolator bolt, front, 100-110 ft/lbs Isolator bolts, side, 100-110 ft/lbs 262 red loctite on them all. Thanks Dean.....AND I finally got my new cps sensor assembly so hopefully I will have remedied my ignition issue.....Never done this before, so I'm sure I will be posting for some help in the near future. |
Jkgonzo
| Posted on Sunday, April 19, 2015 - 05:40 am: |
|
....make sure you are using new bolts these bolts are not to be reused!!!!!! Well then it's off to the hardware store for some grade 8's 'cuz I'm not going to buy/pay for Harleys shit if I don't have to....Thanks |
Harleyelf
| Posted on Sunday, April 19, 2015 - 12:45 pm: |
|
Did you already upgrade the front isolator? Al has them - the one that came on the bike is designed to have its load sit on it, not hang from it. I'm in Appleton; PM me if you need help or want to show me good local roads - Just moved here from Florida. |
D_adams
| Posted on Sunday, April 19, 2015 - 02:12 pm: |
|
Did you actually install the CPS or is it in a box sitting there waiting to be installed? :P |
Jkgonzo
| Posted on Sunday, April 19, 2015 - 08:01 pm: |
|
Did you actually install the CPS or is it in a box sitting there waiting to be installed? :P Waiting for my exhaust to come back from Jethot then it is next on my list......yes, it is still in the bag/box. I have not done this before so I planned on doing some 'factory manual' reading tonight. I may wait till I get the bike out of my house and get it on the garage lift to make it a little easier. Also get Two seasons/Steve over here to help me......and drink my beer. (Message edited by jkgonzo on April 19, 2015) |
Jkgonzo
| Posted on Sunday, April 19, 2015 - 08:07 pm: |
|
Harleyelf, Thanks for the offer. Hopefully we can hook up at the Slimy Crud run this year. I'm sure there should be a few of us Buellers heading up there so.....plan on the 3rd of May, unless it's a rainy day. Are you planning on Homecoming?? We will ride some good roads, enjoy some good food, good company and even head up to the races......good times. |
|