G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Fogcity Posted on Sunday, December 03, 2006 - 03:18 am:        I'd like to clean up the looks a bit of the M2. Am going to start removing plastic and was wondering what brand sprocket covers you have all switched to? And, is there any downside to just removing the plastic guard and leave the original bracket there? Thanks   Xldevil Posted on Sunday, December 03, 2006 - 03:35 am:        Hey. I'm only using the bracket,that's it. Before I changed to that Wilbers shock ,which needs a special bracket,I've been happy with the stock bracket for more than two years. Looks good to me and I can see no disadvantage as long as you are not going to wear any 70's stiled flare on your bike. Ralph (Message edited by xldevil on December 03, 2006)   Zenfrogmaster Posted on Sunday, December 03, 2006 - 09:41 am:        I've got the Crossroads brace and pulley cover. PM me for a picture - I can't shrink it enough to post here.   Cereal Posted on Sunday, December 03, 2006 - 10:57 am:        After ripping a pant leg (they were straight leg not bell bottoms!) and loosing a shoe lace, I went back to the stock cover.   Garrett2 Posted on Sunday, December 03, 2006 - 11:00 am:        zen please email me a pic to garrettxturbo@aol.com   Xldevil Posted on Sunday, December 03, 2006 - 12:18 pm:        Voila. The crossroads cover: Ralph   Djkaplan Posted on Sunday, December 03, 2006 - 02:03 pm:        I like the black plastic cover!   Rocketman Posted on Sunday, December 03, 2006 - 07:04 pm:        I've found nothing in 8 years that looked any good from the aftermarket. For the majority they're either too gimmicky or overdone in my opinion. I'd like a carbon fiber cover. Rocket   Oldog Posted on Sunday, December 03, 2006 - 07:49 pm:        I like the black plastic cover! simple, effective, light, cheap! sounds like a winner.   Leftcoastal Posted on Sunday, December 03, 2006 - 09:20 pm:        I cut up a stock, broken XL cover for my RS AL   Easy_rider Posted on Sunday, December 03, 2006 - 10:49 pm:        Never understood why they left the pulley cover and rear fender as plastic. Seems cheap and unfinished to me. I'm a big fan of the polished look. The drawback with the Banke is the leftover bolt hole in the upper right I need to cap off.   Blks1l Posted on Monday, December 04, 2006 - 09:02 am:        I removed the plastic cover, and left the stock brace, and painted the engine pulley. I think it looks great. Dean   Jayvee Posted on Thursday, December 07, 2006 - 01:28 pm:        I got the Air Tech fiberglass sprocket cover, it's smooth looking, and meets up with the standard cam case better. But it didn't fit my Storz brace, so I'm not using it after all. I wound up just painting my black cover partially, it looks better I think. See my profile for the picture. Used H-D engine case paint ($18), and it matches the engine exactly. (Message edited by jayvee on December 07, 2006)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: