| Author | Message | ||
     Crusty |
I really don't think you want to be replacing your front and rear doors in this weather. | ||
| Ourdee |
They leak air. | ||
| Ourdee |
  | ||
| Ourdee |
 | ||
| 86129squids |
Fancy!!! | ||
| Ourdee |
That is the new bracket for the left side highway peg that got bent from the garbage truck oil puddle at the base of my drive. A huge THANKS goes out to Matthew for making me a new vinyl graphic for it. | ||
| Ourdee |
   | ||
| Ourdee |
First and second coat. Yes it has silver sparkles in it. I discovered a line in the back wall. It was driving me nuts. So, it has received a new layer of mud. I will sand and prime and Sparkle blue it again.   | ||
| Ourdee |
 | ||
| Ourdee |
| ||
| Whisperstealth |
Love your highway pegs! I had a set of Palmer highway pegs on mine, but they broke. Yours look much cleaner and more robust. | ||
| Ourdee |
Mine saved the left side when the bike went down. | ||
| Zac4mac |
I have a set of 5Odro case savers on my Uly. Been thinking about putting highway pegs on them. Too cold to do anything in the garage... | ||
| Ourdee |
I made the brackets out of .250" aluminum plate. The bolts and spacers came from McMaster Carr. I think they still just send me everything I order. Then send me an invoice like I'm important or something. | ||
| Ourdee |
There is good luck and bad luck. I was going to put the sink top on the cabinet today. I put the cabinet in place and did the baseboard trim. Went to set the top on and it is for a cabinet that is 3" deeper. Looks like I need to make the cabinet 3" bigger. | ||
| Ourdee |
Saw right. I have pulled the cabinet. It is in the garage. I am fresh out of table saws. I'll screw a board to a sheet of plywood as a guide and use a circular saw to cut a three inch strip to extent the left side. Then cut a piece as a backer to attach it.The right side will just get screwed to the wall 3" further out. I'll cut a 3" strip out of the flooring as the cabinet is installed on the slab  | ||
| Zacks |
I believe that is the opposite of the thread title....??? | ||
| Ourdee |
I am truly blessed. I have the ability to make it right. This has been the bathroom from hades. I just keep chipping away at it. I will whoop it. | ||
| Ourdee |
Smellin' like a funeral up in here.  | ||
| Ourdee |
Of course I have a Buell!  | ||
| Ourdee |
Yes the garage is a mess.  | ||
| Ourdee |
Need a new p-trap for the sink and crown molding.     | ||
| Whisperstealth |
Wow! Looks fantastic! Great job! | ||
| Ourdee |
Tracey and I are referring to it as the bathroom from Hades. Not a square corner in it and non standard measurements on the framing. One wall has 2x6 framing and three walls have 2x3 framing. Framing for tub opening was over-size. I have almost finished in spite of the oddity. Thank you for the encouragement. | ||
| Crusty |
It looks good! Congratulations! | ||
| Zacks |
Missing cherubs tho... | ||
| Kmbuell |
Looks really good. The tougher the challenge the sweeter the victory! Looks like you won this one! Great job! | ||
| Ourdee |
And crown molding too.  | ||
| Ourdee |
Thank yous. | ||
| Ourdee |
The light grey cabinet is too big between the turdlet and the tub. So I made her a ladder for hanging guest towels and installed a set of shelves:  It is put together with wedges in the ends of the rungs, and a few drops of elmer's glue:  |
