| Author |
Message |
    
Hogs
| | Posted on Monday, November 23, 2009 - 05:11 pm: | 
|
YEah I don`t know why I even think it, But Damn My 12R I couldn`t bang it like that from first to second Without the Front Coming Straight up... Now I do Have the 9 Chain and front Engine Sprocket, Along with a few extras But Motor inside is all Stock... What, I may have 85 Lbs. of Rear wheel Torque, and lets say I got a 100 RWHP to Boot...Now that MAy be pushing it abit, But Damn IF I had 135 lbs. RWTorque and 160 RWHP,All That TORQUE...
I couldn`t Begin to think How I Could hold it down, And it sure sounded like the bike was reving out, in them first three gears to me...
Damn I may be way out in left field on this... Crap, I have been wrong once before |
No_rice
| | Posted on Monday, November 23, 2009 - 05:20 pm: |
|
so.... if i end up down there with you guys at gainesville for the winter, i do get to take it for a spin dont i....?! |
Boltrider
| | Posted on Monday, November 23, 2009 - 05:21 pm: |
|
I thought I remember reading awhile ago that EricZ put a chain conversion on with taller gearing to help keep the front wheel on the ground. |
No_rice
| | Posted on Monday, November 23, 2009 - 05:23 pm: |
|
oh, and by the way. that rocks! |
Mudinmyvaynes
| | Posted on Monday, November 23, 2009 - 05:26 pm: |
|
 *picks jaw up off the floor* I dont know what to say, that much power has to a rush, anything like riding bulls? 8 seconds on the back of a quarter ton steer is pretty hellacious, I'll pay ya to get 8 seconds on this thing, damn!!!
Very appealing, very, very, appealing. |
Greg_e
| | Posted on Monday, November 23, 2009 - 08:51 pm: |
|
My 9R often spins the tire when I fumble the first to second change, only once did it pick the nose up. It's possible he had a big slide going when he shifted and just road it out which is often the safest way to catch it. |
Apps
| | Posted on Wednesday, November 25, 2009 - 11:36 am: |
|
Is there a page with the build details of this bike? That thing is awesome! Just curious as to what all has been done and what hardware was used..... |
Piotr12
| | Posted on Wednesday, November 25, 2009 - 12:17 pm: |
|
Here you go:
http://www.badweatherbikers.com/buell/messages/327 77/488626.html?1250657376
And another vid:
http://www.badweatherbikers.com/buell/messages/327 77/505372.html?1256055544 |
Drhodes1970
| | Posted on Wednesday, November 25, 2009 - 05:32 pm: |
|
What kind of longevity do you think you will get out of this motor? |
|
