| Author | Message | ||
     Dannybuell |
A comfort seat was snapped up earlier this week in the P&A section at midnight with several wanting to buy, at midnight! I believe that there is strong demand for a good valued comfort seat. Everyone listed below would like to purchase a Comfort Seat at or near the original selling price of $150.00. In less than a week one dozen buyers. Please speak up as we are trying to get Erik Buell Racing to develop an endurance racing seat. If that fails the second option is to get American Sport Bike to participate. I would love to see either Erik Buell Racing or American Sport Bike swing the deal. Everyone will benefit with a large enough sign up. stock-------------------Dman stock-------------------Puddlepirate stock-------------------Pdccd stock-------------------Pittsburgh_guy stock-------------------Ponti1 stock-------------------Mtuly 2" thicker--------------Craiga stock-------------------Orman1649 2" thicker--------------Rt_performance 2" thicker--------------DannyBuell stock-------------------Dbolemiss stock-------------------D_adams stock-------------------Blk09r stock-------------------ezblast THX (Message edited by dannybuell on May 08, 2010) (Message edited by ezblast on May 08, 2010) | ||
| Afhans |
If the price is still about $150 w/reasonable shipping I'll buy one too. Just be sure to e-mail me in case I forget to follow the thread. Also I leave for Paris Sunday and will not be back until Friday night. | ||
| Jredx1 |
Count me in. I was just about place an order for a corbin but would much rather support Erik Buell Racing or American Sport Bike. I'll hold out for a bit and see if anything develops. | ||
| Norwegian_1125cr |
Sign me up! It must be possible to get the factory that discontinued the comfort seat to start producing them again if we had Erik Buell Racing or American Sport Bike to confirm that they have several customers wanting to buy it. | ||
| Zip88 |
I would like to see ebr stitched on the side in red. Count me in. | ||
| Betzy |
I'm in, as long as the quick release system from American Sport Bike can still be used. | ||
| Petereid |
are we sure the original is "permanently" obsolete? A couple of the online dealers are still showing it as a good part number | ||
| Wec_032 |
I'm in too so long as the price is around $150.00 and shipping is reasonable. As with Betzy, I would want to still be able to use my quick release system from American Sport Bike. | ||
| Zac4mac |
 | ||
| Eddiep |
I'm interested. The Erik Buell Racing stitched in would be a great option also. | ||
| Eddiep |
I'm interested. The Erik Buell Racing stitched in would be a great option also. | ||
| Hogzilla |
Count me in for one. I was about to get the Corbin as well, but would much rather get this. | ||
| Stearmandriver |
Please count me in for a stock height. Thanks Dave | ||
| Carbonbigfoot |
I'm in. $150 ready to go. Rob | ||
| Jeepinbueller |
Count me in 100%. A 1-2" higher version would be superb for us with a longer inseam. Hope this works out. | ||
| Dannybuell |
I am hoping that we can get the original maker interested, options we can play by ear and see what happens. Option(s) Buyer stock-------------------------------Dman stock-------------------------------Puddlepirate stock-------------------------------Pdccd stock-------------------------------Pittsburgh_guy stock-------------------------------Ponti1 stock-------------------------------Mtuly stock-------------------------------Craiga stock-------------------------------Orman1649 2" thicker--------------------------Rt_performance 2" thicker--------------------------Dannybuell stock-------------------------------Dbolemiss stock-------------------------------D_adams stock-------------------------------Blk09r stock-------------------------------Afhans stock-------------------------------Jredx1 stock-------------------------------Norwegian_1125 cr stock-------------------------------Zip88 stock-------------------------------Betzy stock-------------------------------Wec_032 stock-+-Erik Buell Racing on side---Eddiep stock-------------------------------Hogzilla stock-------------------------------Stearmandriver stock-------------------------------Carbonbigfoot THX | ||
| Puredrive |
Sign me Up. 150..lets do it. | ||
| D_adams |
+1 Erik Buell Racing on side | ||
| F_stop |
Sign me up. Assuming(?) stock here refers to original touring/custom seat dimensions. Could learn to love 2" thicker! Erik Buell Racing on side would be even sweeter. Thanks, Steve | ||
| Ratgin |
Inseam challenged but i think i could swing my leg over a +2 and still maybe tippy toe. Sucks being 6'2" but having a 29" inseam (on a good day). | ||
| Jredx1 |
Just realized I didn't specify. I'd rather have the 2" thicker seat. | ||
| Skntpig |
stock height E-B-R logo ftw. | ||
| Betzy |
Any one have pics of the 2" raised one vs stock? I do a lot weight on it  might be worth it. I would for sure like the Erik Buell Racing on the side! | ||
| Father_of_an_era |
Sounds like a great deal if it is 150 and the shipping is inexpensive. Sign me up. | ||
| Nickg |
if it has Erik Buell Racing stitched..i would sell my comfort seat for one of these | ||
| F22raptor |
I take one,also if it has Erik Buell Racing stitched.$150.00 | ||
| Spaceman |
Count me in. | ||
| Jonesgw |
I would for sure like the Erik Buell Racing on the side! | ||
| Craiga |
Dannybuell is the height of this seat going to be the same as the Buell comfort seat, if so, stock is good for me, and Erik Buell Racing stitched would be sweet... I agree with Betzy, I would like to be able to still use my American Sport Bike quik release pins still. (Message edited by craiga on May 08, 2010) (Message edited by craiga on May 08, 2010) | ||
| Xelerator |
stock_+_Erik Buell Racing on side---Xelerator |
