Author |
Message |
Kmbuell
| Posted on Wednesday, May 06, 2015 - 08:19 pm: |
|
From a 2000 S3T. Straight and clean. Bars are 27" wide, 6-1/2" rise and 5" pull back. Looking for $35.00 shipped in the US. Email me at kmeath34@gmail.com Thanks, Kevin
|
H0gwash
| Posted on Thursday, May 07, 2015 - 08:59 am: |
|
emailing you now... |
Kmbuell
| Posted on Thursday, May 07, 2015 - 11:47 am: |
|
Bars are sold. Kevin |
Jayvee
| Posted on Thursday, May 07, 2015 - 12:27 pm: |
|
For future reference, is there any part number stamped where the triple clamps bolt to it? |
Kmbuell
| Posted on Friday, May 08, 2015 - 08:28 pm: |
|
I forgot to look before I packed and shipped these today. I believe there was a short 4 or 5 digit number though. Kevin |
H0gwash
| Posted on Monday, May 18, 2015 - 03:22 pm: |
|
I got the bars mounted yesterday, but I think I noticed some numbers, I will check. |
H0gwash
| Posted on Wednesday, May 20, 2015 - 08:08 pm: |
|
The S3T handlebar has "N02M" stamped in the center of the bars. If you imagine you're seated on a bike looking down at the installed handlebar, it's right in the center visible under the handlebar clamps. You can see it upside down in the third picture in the original post. |
Jayvee
| Posted on Friday, May 22, 2015 - 11:57 am: |
|
Looks like the N02M bars are for 1999 and later S3Ts and Blasts. The earlier S3T, '97'98 got N02E. Don't have the measurements for that, but it's probably the one where the inner center is one inch less in width. |
|