| Author | Message | ||
     Canxb |
Hello all, I am looking for some help. I just ordered the Jardine RT-One for the wife's blast and was in the middle of of putting it on. Unfortunately Jardine forgot to pack one piece in my install kit. There is a spacer that goes in-between the muffler clamp and the the "L" bracket at the rear of the nike. Does anyone know what the thickness of that spacer is? I have the bolt so I can make the spacer at work, I just need the thickness. Any help would be greatly appreciated. | ||
| Ezblast |
More important - are you using the stock lower front hardware as advised here and elsewhere? EZ | ||
| Canxb |
No, I used all the Jardine Hardware. What should I be using from the stocker? The bolt, washer and nut? The rubber mounts? I used the spherical washers from the Jardine kit. EZ, please tell me what I should be using. I do not want trouble down the road. | ||
| Ezblast |
Then mount it with the stock lower hardware,Jardine stuff doesn't stop enough vibration, and use washers for the spacer - make sure the mounting is tight fitting - lol EZ |
