| Author | Message | ||
     Debueller |
I have an unusable primary cover that has a broken ball ramp shoulder. Obiewan also had one break and he repaired it. Here is a thread he did on his repair with very good photos: http://www.badweatherbikers.com/buell/messages/384 2/282980.html His actual repair looks to be better than new since he used a steel insert and screws to hold the insert in. When mine failed it was very difficult to find a new one, and it cost almost $300. My Uly was down for over a month during peak riding season.  Is there anyone that is doing repairs on these primary covers that might be interested in fixing my broken one for a reasonable price? I’m concerned if mine fails again my Uly will be down for an unreasonable amount of time while searching for a replacement. Having a spare on hand at home would give me a lot of peace of mind. Thanks | ||
| Debueller |
Bump for Wisperstealth. (and me to) http://www.badweatherbikers.com/buell/messages/142 838/634869.html?1306950390 | ||
| Whisperstealth |
+1! Thanks a bunch Jerry for posting a thread.  Definately need some help. I just don't have the tools to do the work. Here is another thread that shows how Odie fixed his. Basically the same as Obiewan's, with a few changes. http://www.badweatherbikers.com/buell/messages/142 838/483215.html?1249043054 I may be loosing my internet, so if anyone is able to help please call 1-870-955-0725 Brother_In_Buells fix is awesome as well. |
