G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Old School Buell » Archives OSB 001 » Archive through July 14, 2007 » Steering lock removal « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Beatx1
Posted on Tuesday, July 03, 2007 - 04:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I'm getting ready to do my steering head bearings and the service manual says to remove the lock. I can't get my lock to turn. I have the original key for the bike and several extras and none work. Is there a trick to getting this thing to turn. Thanks much for the help!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Oldog
Posted on Tuesday, July 03, 2007 - 05:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Remove the locking screw from the frame, take the key and insert it and un lock it
if its loose you can remove the trees, If you want to remove it for service I believe that you must remove the stem(lower tree) to get it out.

a shot of WD 40 will help too.

(Message edited by OlDog on July 03, 2007)
Top of pagePrevious messageNext messageBottom of page Link to this message

Beatx1
Posted on Tuesday, July 03, 2007 - 05:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thanks for answering. The stupid thing doesn't turn I'll try lubing it. 55000 miles and I never used it. It does look like the previous owner did pry on it because the pain around it is chipped.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bad_karma
Posted on Wednesday, July 04, 2007 - 12:03 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Steve
I replaced my bearings and races on the 99 S3 and never removed the lock.
Joe
Top of pagePrevious messageNext messageBottom of page Link to this message

Oldog
Posted on Wednesday, July 04, 2007 - 12:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

you can still pull the tree, then remove it for cleaning and lubing (or plug the hole) as it's unlocked.
Top of pagePrevious messageNext messageBottom of page Link to this message

Akbuell
Posted on Wednesday, July 04, 2007 - 12:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

When I did the 10,000 mi service on my X-1, I was able to remove the steering stem easily with out removing the fork lock. Just my experience, but I think you can skip that step. Getting the lower bearing off of the stem was my biggest hassle. Rest was easy.
Top of pagePrevious messageNext messageBottom of page Link to this message

Beatx1
Posted on Wednesday, July 04, 2007 - 08:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thanks guys! I scoped out the section on the steering lock and everyone is correct. When I drop the triple tree to get at the bearings undo the set-screw and insert the key to twist the lock out. The manual doesn't say that the lock has to lock or unlock just use the key to twist the whole thing out. Thanks again for the help! I usually don't ask for help and it's nice to know that you guys are here.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mikef5000
Posted on Thursday, July 05, 2007 - 06:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I ask for help all the time! These guys are great!
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration