G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Old School Buell » Archives OSB 001 » Archive through June 04, 2005 » S2 problems « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Yooper71
Posted on Monday, April 25, 2005 - 10:26 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I purchased a 95 S2 a couple of years ago and continue to work the bugs out of it. Right now I’m at a loss as to what to check next with my current problem. Any suggestions would be greatly appreciated…

Last fall a new stator and voltage regulator were installed and this spring I installed new plugs, wires and replaced the compufire ignition with a new one. After about 100 miles of riding the rear cylinder starts to cut out and the bike back fires and sputters. If I replace the plugs, it’s good to go again for about another 100 miles. The only ignition component I didn’t replace were the coils, but they tested out fine.

Thanks for any tips on what to look at next.
Top of pagePrevious messageNext messageBottom of page Link to this message

Azbueller
Posted on Monday, April 25, 2005 - 10:58 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Recheck the plug wires and ALL the wiring for the ignition, could be a bad plug wire, broken wire, one at a connection or a bad ground.
Top of pagePrevious messageNext messageBottom of page Link to this message

Aaomy
Posted on Monday, April 25, 2005 - 12:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

what dose the plug look like when you pull it out?
Top of pagePrevious messageNext messageBottom of page Link to this message

Yooper71
Posted on Monday, April 25, 2005 - 12:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

When I pull out the rear plug it's black and pretty carboned up.
Top of pagePrevious messageNext messageBottom of page Link to this message

Firemanjim
Posted on Monday, April 25, 2005 - 01:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

How is front running?Maybe too rich on carb.Do a compression check.Any other symptoms when rear plug goes away.S-2's have circuit breakers that love to corrode and a symptom of this is dropping a cylinder,but the tach will run 1/2 speed also.
Top of pagePrevious messageNext messageBottom of page Link to this message

Aaomy
Posted on Monday, April 25, 2005 - 07:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

you could also look for an intake leak around your front cylinder, thats a quick check with can of starter fluid. if it was both cylinder cutting out you could also check the pink tack feed wire,, if something rubs threw the jacketing and shorts it out as it vibrates it will intermittently kill the coil,, giving you no spark,, but this would affect both cylinders. i would look for a intake leak and do a compression check like fireman said.. hes a goo roo at this stuff. what dose the front plug look like when you pull it? color? smooth? shiny? whiskery? wet?
Top of pagePrevious messageNext messageBottom of page Link to this message

Gnomad
Posted on Wednesday, April 27, 2005 - 01:48 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Is it possible to swap the coils?
Sometimes coils will test OK when cold but short our internally when warm.
Top of pagePrevious messageNext messageBottom of page Link to this message

Yooper71
Posted on Wednesday, April 27, 2005 - 07:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I first replaced the intake seals when this started happening. I'm going to get my hands on a compression tester and check out the cylinder. I have thought about just swapping out the coils as they are about the only ignition component that hasn't been replaced. I'm also going to look at the circuit breakers and clean them up...fun fun
Top of pagePrevious messageNext messageBottom of page Link to this message

Firemanjim
Posted on Wednesday, April 27, 2005 - 12:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Those breakers are cheap at the local auto parts place so replace if they are corroded and carry a spare.
Top of pagePrevious messageNext messageBottom of page Link to this message

Buell_by_buhle
Posted on Saturday, May 07, 2005 - 10:05 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hey Pete,

First thing for any diagnosis, is to determine if the problem affects one or both cylinders. If its only one, then there are alot fewer components to check out. Get the service manual if you need more detailed info.

My guess is its an electrical problem based on the bike's age (and knowing what problems S2's can have over 113K miles of ownership :-). Be thorough with your testing and swapping, and you'll find the cause. Good luck.
Top of pagePrevious messageNext messageBottom of page Link to this message

Firemanjim
Posted on Saturday, May 07, 2005 - 12:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

As I live and breathe--it's Gordon Buhle back from the dead.Welcome back,your S-2 wisdom will be welcome.
Gordon must be pushing 100,000 on his S-2.He and I have been running into each other with our bikes since 1995.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nitsebes
Posted on Saturday, May 07, 2005 - 04:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Looks like he's pushing 114K if you read his post.
Top of pagePrevious messageNext messageBottom of page Link to this message

Buell_by_buhle
Posted on Friday, May 20, 2005 - 02:27 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hey Jim, yeah I'm back ('caus Rex keeps buggin' me)

Sadly, haven't ridden the S2 for many moons! Latest project has been to fix/restore my brother's 1978 XLCR. Such a blast from the past--seeing how Buell evolved the Sportster engine from those early days...

Been riding the XLCR around, doing the breakin thing. Well, either the XLCR or the Firebolt, weather permitting....

Not to frighten anyone with a pre-Buell :-) but here's what the Willie G designed XLCR looks like:
Top of pagePrevious messageNext messageBottom of page Link to this message

Buelliedan
Posted on Friday, May 20, 2005 - 10:09 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I love the lines of the XLCR. Now if it would just handle like a Buell!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Bake
Posted on Friday, May 20, 2005 - 10:28 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Best looking sportster ever built. (hope my girlfriend dosn't see this post!)
Top of pagePrevious messageNext messageBottom of page Link to this message

Jerry_haughton
Posted on Friday, May 20, 2005 - 01:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Gordon, it's a treat to see you here. : )

FB
Top of pagePrevious messageNext messageBottom of page Link to this message

Buell_by_buhle
Posted on Sunday, May 22, 2005 - 01:54 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Ferris! Likewise, my friend.... How's the Blurr rebuild coming?
Top of pagePrevious messageNext messageBottom of page Link to this message

Rex
Posted on Sunday, May 22, 2005 - 02:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

bring that bike to aSBN~ in June...looks good.

sporster diana has one of those bikes and for sale too, I believe...she is part of the bay area sporster and the southern bay buell owners group....rex
Top of pagePrevious messageNext messageBottom of page Link to this message

Jerry_haughton
Posted on Sunday, May 22, 2005 - 02:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

GB, the BLURR lives, but at the hands of many others. pretty much only have the frame and a few odds and ends left. FMJ has the engine, it's in his Bonneville bike. long story, deserves at least a couple of high-quality beers to do it justice, if not at Laguna maybe you'll consider riding to Lake Isabella with FMJ this fall for Oktoberfast? : )

FB
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration