G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Old School Buell » Archive through January 30, 2013 » K0506.2a Roll Pin Isolator Help! « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Serialk
Posted on Friday, January 18, 2013 - 01:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Okay I have been away for a month. Now im back to put my bike together and my removable side plate that I got back from the platers has damaged the roll pin that lines up the rear iso....

part number is 16270-94y supercede to k0506.2A

Deeleys has 0 stock and I could wait for a month or two to see a 60 cent piece... so my question is. Any one know of another source? its like a 60 cent roll pin. there has got to be another way!
Any help is appreciated.
This is all I need to get my bike on two wheels!
Top of pagePrevious messageNext messageBottom of page Link to this message

Natexlh1000
Posted on Friday, January 18, 2013 - 01:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

If you get it out and take it to the hardware store, I'll wager it's a standard part.
They didn't look special to me.
Top of pagePrevious messageNext messageBottom of page Link to this message

Serialk
Posted on Friday, January 18, 2013 - 01:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

i know. I wish i had it to take it to the hardware store but the platers cut it off... i know not pleased... its flush with with sideplate. i need to drill it out
Top of pagePrevious messageNext messageBottom of page Link to this message

Akbuell
Posted on Friday, January 18, 2013 - 01:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Since it is a roll pin, you might try measuring the depth of the hole your stub is in w/ a length of wire, then the depth of the hole in the isolator to get overall length. Measure the dia of the stub (before drilling) for the O.D.

With the dimensions, the hardware store or machine shop, ect should be able to help.

Hope this helps, Dave
Top of pagePrevious messageNext messageBottom of page Link to this message

Jim2
Posted on Friday, January 18, 2013 - 01:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hold drill bits up to it to determine the correct size. Then take the drill bit to the Auto Parts store or H/W store and get new roll pin. The correct size will be a very small fraction larger than the hole in the frame for a tight fit.
Top of pagePrevious messageNext messageBottom of page Link to this message

Serialk
Posted on Friday, January 18, 2013 - 01:41 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

off to the local hardware store to figure this out. thanks for the tips and input!
Top of pagePrevious messageNext messageBottom of page Link to this message

Pash
Posted on Friday, January 18, 2013 - 01:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I think I have a new one somewhere, I will try and dig it out and give you the measurements...
Top of pagePrevious messageNext messageBottom of page Link to this message

Serialk
Posted on Friday, January 18, 2013 - 01:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

that would be awesome if you could Pash
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellistic
Posted on Friday, January 18, 2013 - 02:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

ACE HARDWARE is the place !!!
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration