Author |
Message |
Blks1l
| Posted on Thursday, March 03, 2011 - 08:03 pm: |
|
When you others have had an issue with the bearings spinning in the rear PM wheels was it just the RH side outer? That is what I have had happen. I just replaced the one bearing, installed it with Loc Tite 680, and also staked it. It looks like I had a difference of about .005 between the hub ID and the OD of the new bearing. |
Jramsey
| Posted on Thursday, March 03, 2011 - 08:45 pm: |
|
Hookimpucky ain't gunna fix 005. I would have it sleeved. |
Blake
| Posted on Thursday, March 03, 2011 - 10:15 pm: |
|
I think the Loc Tite advertises working on diametral gaps of up to 0.015", so a diameter difference of 0.005" ought to be fine.
quote:Loctite 680 Retaining Compound Loctite® 680™ is a high strength, high viscosity room temperature curing adhesive used to join fitted cylindrical parts. It fixtures in 10 minutes and provides a shear strength of 4,000 psi. Capable of filling diametral gaps up to 0.015 in. (0.38 mm). Loctite® 680™ allows relaxed machining tolerances, and replaces clamp rings, set screws, and snap rings. http://www.henkelna.com/cps/rde/xchg/henkel_us/hs. xsl/product-search-1554.htm?iname=Loctite+680+Reta ining+Compound&countryCode=us&BU=industrial&parent redDotUID=productfinder&redDotUID=0000000HWK
|
Blks1l
| Posted on Thursday, March 03, 2011 - 10:52 pm: |
|
I figured I would try this first, it didn't cost anything but a little of my time and a new bearing. |
Buellistic
| Posted on Friday, March 04, 2011 - 06:09 am: |
|
When you get done picking one of the suggested RH outer bearing fix'es, try this so it does not happen again ... DRIVE BELT ADJUSTMENT Class 101 and will add PRIMARY ADJUSTMENT Class 101, just PM me for copies ... |
Blks1l
| Posted on Friday, March 04, 2011 - 08:47 am: |
|
Thanks Buellistic, I got the info. from you a couple of weeks ago. |
Jramsey
| Posted on Friday, March 04, 2011 - 08:59 pm: |
|
Loctite® 680™ "allows relaxed machining tolerances", Blake that quote from Loctite is too funny. Metrology and CMM must be outdated according to the Loctite advertising/marketing department..lol I won't be tossing my mic's or DROs in the trash anytime soon. |
|