Author |
Message |
Maru
| Posted on Saturday, September 19, 2009 - 09:27 am: |
|
Can someone please post a picture of a mounted Buell Pro Series exhaust rear mount? |
Ratbuell
| Posted on Saturday, September 19, 2009 - 09:51 am: |
|
I have to go to the garage to get a pic, but if you're talking about the rear of the muffler, it's a pair of flat metal plates, about 2.5" long, with a hole at each end. They go from the tabs on the muffler, to the tabs on the bottom of the engine case. 4 bolts, because they're offset. |
Maru
| Posted on Saturday, September 19, 2009 - 10:02 am: |
|
Hi Joe. This exhaust came with 2 round stainless bands that go around the rear of the exhaust with tabbs for additional something. It has no welded on rear mount. Presumably, the 2 metal plates you are talking about are the same as the two plates for the stock exhaust and they bolt to these two straps? |
Whitex102
| Posted on Saturday, September 19, 2009 - 12:48 pm: |
|
Pictures of my X1's Mount.
|
Whitex102
| Posted on Saturday, September 19, 2009 - 12:58 pm: |
|
Another
Hope these Help. |
Maru
| Posted on Saturday, September 19, 2009 - 01:28 pm: |
|
Very helpful whitex, it looks like I need the stock Z mount or whatever it is called. Neither of my bikes have these as both had Vance and Hines exhaust when i bought them. Thanks guys. |
|