Author |
Message |
Rex
| Posted on Monday, February 04, 2008 - 01:55 pm: |
|
My buell has an aftermarket kickstand, that come off of the side of the motor. Can anyone post how a normal kickstand looks and mounts to an S1. Trying to put it back the way it was. the stock kickstand is normal in its lean. This one leans over too far for me. thanks REX |
Ratbuell
| Posted on Monday, February 04, 2008 - 02:13 pm: |
|
There should be a mounting boss on the frame under your left footpeg, at the leading edge / bottom corner of the passenger footpeg "triangle". Kickstand goes inside the channel, pin through the hole, spring goes to another hole on the frame. I'll try to get a pic for you tonight |
Rex
| Posted on Monday, February 04, 2008 - 03:51 pm: |
|
sounds good. thanks REX looked in the parts book and it doesn't really show much, manual either. thanks |
Spiderman
| Posted on Monday, February 04, 2008 - 05:00 pm: |
|
You want to sell that kickstand? |
Rex
| Posted on Monday, February 04, 2008 - 06:30 pm: |
|
probably. you know the one I am explaining. It bolts up to the left side of the motor, vrs. the regular kickstand mounting up behind the motor.... I would need to replace it first, but to you spidey, sure. REX |
Rex
| Posted on Monday, February 04, 2008 - 06:39 pm: |
|
|
Spiderman
| Posted on Monday, February 04, 2008 - 11:40 pm: |
|
Sweetness! You da man REX I would send you a regular stand but I gave away my last one LOL. |
Firemanjim
| Posted on Tuesday, February 05, 2008 - 01:23 am: |
|
Rex,post a pic as I need a stand on the ROC S-1 as the stock mounting point was cut off. |
Court
| Posted on Tuesday, February 05, 2008 - 07:55 am: |
|
Rex: Very interesting. Are you sure it's aftermarket or have you ended up with a factory prototype. Go back and look closely at the yellow S-1 on the cover of Cycle World.
|
Jos51700
| Posted on Tuesday, February 05, 2008 - 08:37 am: |
|
More photo's, please. |
|