G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Henrik Posted on Wednesday, February 08, 2006 - 10:38 am:        Back in the day of Tuber Problems, there were concerns that the throttle cables, if not properly adjusted, could jump out of the receiving barrels on the carb side. Now imagine your throttle cable stuck at WFO - and then get thee to thy bike and make sure it doesn't happen to you: The cables can be safety wired in place by making a loop around the cables themselves (individually) and securing the other end around the cable bracket; as seen in these photos. Buell on later model tubers installed a safety bracket kit, which will secure the cables, similar to safety wiring. I don' t know the part # of the kit, but one of our excellent sponsors will no doubt be able to help you. Hope this helps. Henrik   Buellistic Posted on Wednesday, February 08, 2006 - 11:14 am:        THROTTLE CABLE CLAMP: BUELLSCHITTE PART NUMBERS !!! C0130.l Clamp C0129.l Clamp AN0604.2CZ SCREW IMO safety wire is BETTER !!!   Henrik Posted on Wednesday, February 08, 2006 - 12:14 pm:        Thanks for the part#s LaFayette. Henrik   Ara Posted on Saturday, February 11, 2006 - 08:20 am:        This is a five minute installation, but do not expect to receive the tiny screw that clamps the two parts together. For that you'll need a trip to the hardware store. I recommend SS, of course.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: