G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Griffo Posted on Saturday, April 09, 2011 - 12:23 am:        Got a mate with an XB12S and his clutch hub stuffed up , he cant source an XB12 one but the local Harley dealer here Morgan and Wacker told him the XB9 one would do the trick , its a lot shallower and you have to leave a couple of clutch plates out for it to fit , can anyone tell me will this still be ok with the fewer clutch plates , cheers   Griffo Posted on Saturday, April 09, 2011 - 12:51 am:        I had a look at this clutch hub and I dont think they've even given him an XB9 one its probably a tuber one   Froggy Posted on Saturday, April 09, 2011 - 01:07 am:        XB 9 and 12 use the same clutch and transmission and related parts. In fact, 99% of the engine is the same. The biggest differences are the primary drive chain ratio, the pistons, and connecting rods.   Griffo Posted on Saturday, April 09, 2011 - 05:03 am:        yep thanks mate , it appears that the hub he got sold was for a tuber , doesnt work out too bad as I happen to own one so ill buy it off him for a spare and he can get one for the XB , thanks .

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: