G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through June 22, 2007 » ? regarding shift lever bolt « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Pso
Posted on Thursday, June 14, 2007 - 10:03 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I needed to remove the primary cover from Sara's Scg. (to avoid embarsement please do no task why)When I reinstalled the cover, I torqued down the bolt that holds the foot shift lever down to the factory manual spec torque. I found then that the lever would not move freely back to its resting position. When upshifting the foot lever would stay up. It is as if the return spring is not strong enough to return the lever. I lossened the bolt about 2-5 ft lbs and it seems to work very well. What did I do wrong? It seems to me that there should have been a tad longer of a spacer/bushing in the mechanism. I checked my shop manual (I have the one for the Uly and other than the mounting bolts for the shift lever it appears to be the same as the Scg) and checked to make sure the bushing and colars are on the lever. I also put a good dab of loctite red on the bolt just to make sure it does not work out because I am not up to minimum torque. Any help suggestion appreciated.
Top of pagePrevious messageNext messageBottom of page Link to this message

Spatten1
Posted on Thursday, June 14, 2007 - 10:40 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Maybe the plastic collars are not mashed into the lever properly, or got burs on them during the incident you don't want to talk about. The metal collar should be wider than the lever plus the plastic inserts, preventing binding.

ps. Use red locktite. I lost my bolt and collar a couple weeks ago because I didn't.
Top of pagePrevious messageNext messageBottom of page Link to this message

Rich
Posted on Thursday, June 14, 2007 - 11:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Check it again to see if the bolt is bent. That's what happened to me, but I don't want to talk about it.

I replaced the bolt and the washers/bushings.
Top of pagePrevious messageNext messageBottom of page Link to this message

Spatten1
Posted on Thursday, June 14, 2007 - 03:50 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Good call Rich.
Top of pagePrevious messageNext messageBottom of page Link to this message

Semirgdj
Posted on Friday, June 15, 2007 - 01:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

+2 on the bolt being bent Replace it and the spacer
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration