G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through September 06, 2006 » Race kit Install « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Thespive
Posted on Sunday, September 03, 2006 - 04:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I just put the race kit muffler on my '06 and it looks like it manufactured out of spec. no matter how we tightened it down the exhaust outlet only had about 1/16 of an inch between it and the pulley. On a couple of rides everything seems fine, but there is a very slight mark from the pully contacting the can. Any suggestions, or should I not worry about it?

Thanks,

--Sean
Top of pagePrevious messageNext messageBottom of page Link to this message

Glitch
Posted on Sunday, September 03, 2006 - 05:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Sounds like you're putting an 03 Race kit on an 06 bike.
The 03s had a different idle pulley than the newer bikes, because of the belt and pulleys got upgraded.
I've seen this before, and other than a little ding on the pipe where it hit, all is good.
Top of pagePrevious messageNext messageBottom of page Link to this message

Thespive
Posted on Sunday, September 03, 2006 - 08:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks Glitch. I bought it from one of the BadWeb vendors and it was his last one left, I didn't think to ask about the pipe part number because the ECM and filter are correct for my bike. Oh well, if it is no big deal I won't worry about it.

--Sean
Top of pagePrevious messageNext messageBottom of page Link to this message

Pwnzor
Posted on Monday, September 04, 2006 - 11:35 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I think I'd take a grinder to the pipe before it damages your pulley. If you scrape the pipe going over a bump it can move slightly and make the problem worse. I don't think anyone would notice if you trimmed a little material away.
Top of pagePrevious messageNext messageBottom of page Link to this message

Txfatcat
Posted on Monday, September 04, 2006 - 11:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

You may be able to take a 1" socket and a hammer and massage it a little in that location where its seems tight. This will give you a very gentle round smooth dent in the can that will not be very noticable yet give you the clearance needed. This is very common in aftermarket headers on some cars.
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellshyter
Posted on Tuesday, September 05, 2006 - 09:39 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

A grinder? The pipe isn't that thick. You'll grind a hole right through it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Pwnzor
Posted on Tuesday, September 05, 2006 - 11:26 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

It's the outlet I'm referring to, not the body of the pipe. If it's the can, I'd dent it. The outlet, I'd grind it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Glitch
Posted on Tuesday, September 05, 2006 - 12:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

By the time you notice it it's too late.
It's already got a little dent, and no more modding is needed.
Kind of the self modding mod. ;)
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration