G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through June 05, 2006 » Archive through June 02, 2006 » .Removing primary cover « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Jbird
Posted on Friday, June 02, 2006 - 12:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Hello all,

I need some tech advise. I am in the process of removing my primary cover on my 03 XB9S. I am at the point where I should be able to just pull it off, WRONG. The cover is seriously stuck on. I have pulled and pulled and even lightly tapped around it with a rubber mallet but to no avail. So does any one have any tricks? I could be a little more forceful but I figured I'd ask first. Don't want to scratch the paint. Any help would be appreciated.

Thanx Jason
Top of pagePrevious messageNext messageBottom of page Link to this message

Tpoppa
Posted on Friday, June 02, 2006 - 01:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Do you have the service manual?
Top of pagePrevious messageNext messageBottom of page Link to this message

Nd_xb
Posted on Friday, June 02, 2006 - 02:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Double check that you have removed all the bolts! I did the same thing the first time I pulled the cover. I left the one next to the primary adjuster bolt, and started tugging away until I realized what was going on. Then slide it off the shifter shaft gently. If it still dosnt come off then I would say make sure you have a manual like Tpoppa said, and make sure that you have removed the clutch adjuster and all the pieces that come with it. Good Luck!
Top of pagePrevious messageNext messageBottom of page Link to this message

Jbird
Posted on Friday, June 02, 2006 - 04:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Well I got it off. I do have the manual, and I did have the bolts out. It was just really stuck on there. Had to use a small bar to pry between the muffler mounting bracket and the bottom side of the cover, a small part sticks out on the bottom side I could pry off of. Didn't scratch any thing either.

Thanx
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration