Author |
Message |
Tommy_k
| Posted on Tuesday, February 21, 2006 - 01:56 pm: |
|
Ok... 1.Since the DL can tune the stock ecm to run with all exhaust mods, can it also emulate the exh. servo so it can be removed...like the race ecm? Or, would we have to run an emulator? 2.Where's the best/cheapest place to get the exh. emulator...I know Trojan sells one...any body local? TIA, TK |
Buelldyno_guy
| Posted on Tuesday, February 21, 2006 - 10:52 pm: |
|
Tommy Al is working on it, but until he has one in place I have removed my servo and have it setting back under the seat with the connector plugged in. ... Terry |
Al_lighton
| Posted on Wednesday, February 22, 2006 - 08:32 am: |
|
Joe at HeavyCycles is putting together a bunch of emulators for me. The servo emulator circuit is simple, as the servo has very simple logic to emulate. When the ECM applies power to the servo, it expects to see a hall effect sensor response that indicates that the actuator has rotated fully to it's other extreme. I talked to Joe yesterday and he promised me a bunch of them soon. |
Tommy_k
| Posted on Wednesday, February 22, 2006 - 09:23 am: |
|
Thanks. Keep us posted. This will apply to anyone of course that wants to run a pipe, open airbox, but skip the race ecm and dl tune their stocker. TK |
Fullpower
| Posted on Wednesday, February 22, 2006 - 01:16 pm: |
|
""
|
Litng_dave
| Posted on Wednesday, February 22, 2006 - 01:32 pm: |
|
Fullpower, what kind file is a .unk? I'm not sure how to open it. Was it a misprint? |
|