G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through November 10, 2005 » The Micron hath arrived. « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Monday, October 31, 2005 - 10:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

My new Micron Serpent pipe arrived today. The packaging was very good. Overall fit and finish looks very good as well.

One thing I found strange was that the directions say to use the origional header crush washers. Should I replace these? If so what should I get?

If you have questions, fire away. No pics right now, the batteries in the camera are dead and I don't have any to replace them with.
Top of pagePrevious messageNext messageBottom of page Link to this message

Cataract2
Posted on Monday, October 31, 2005 - 10:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

If you pull off the headers it's best to replace those washers. Just a good rule of thumb.
Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Monday, October 31, 2005 - 11:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

P.S. I have a sound clip if someone can host it. You need to have an MPEG2 codec for it to work.
Top of pagePrevious messageNext messageBottom of page Link to this message

650
Posted on Tuesday, November 01, 2005 - 03:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

You might be able to put it at putfile.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Typeone
Posted on Tuesday, November 01, 2005 - 05:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Indy, if you can't find a place to host it hit me up, i have space. What's your first impression?
Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Tuesday, November 01, 2005 - 06:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Do you mean the sound? Seems pretty good, but thats just from the file that I have/had. Can't seem to find it right now for some reason. Still looking.

First impression of the pipe is that it looks very well made.
Top of pagePrevious messageNext messageBottom of page Link to this message

Typeone
Posted on Tuesday, November 01, 2005 - 06:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

sorry, yeah, meant impression of the sound.
Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Tuesday, November 01, 2005 - 07:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

BTW total weight of the header, pipe, and all the mounting hardware is 17.5 lbs. according to my scale.
Top of pagePrevious messageNext messageBottom of page Link to this message

Buelltroll
Posted on Tuesday, November 01, 2005 - 08:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

http://www.putfile.com
I wanna hear it
Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Tuesday, November 01, 2005 - 09:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Workin on it guys.....I'm trying to recover the PC that has the file on it. The HDD puked and I'm repairing the Windows installation. I'll have it soon.
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemaniac
Posted on Tuesday, November 01, 2005 - 09:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

C-mon Indy, FASTER. FASTER!

Think it will be as loud as my M2?


Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Tuesday, November 01, 2005 - 09:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Dan, there are FEW THINGS ON EARTH as loud as your M2.



OK HERE IT IS GUYS!

IF IT DOESN'T WORK YOU MAY NEED TO DOWNLOAD AND INSTALL AN MPEG2 CODEC!!!

http://media.putfile.com/Buell-Micron-Serpent-Exhaust

(Message edited by indy_bueller on November 01, 2005)
Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Tuesday, November 01, 2005 - 10:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Is it working for you guys?
Top of pagePrevious messageNext messageBottom of page Link to this message

Typeone
Posted on Tuesday, November 01, 2005 - 10:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

no workie here, i get a big QuickTime 'Q' with a question mark. i've got most of the extra goodies installed on my Mac too. hmm. trying...
Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Tuesday, November 01, 2005 - 10:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Hm well it is a Windows Media File. PM coming your way, I'll email it to ya.
Top of pagePrevious messageNext messageBottom of page Link to this message

Garp
Posted on Tuesday, November 01, 2005 - 10:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Works for me, and sounds good too
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemaniac
Posted on Tuesday, November 01, 2005 - 10:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

No workie for me either.



Top of pagePrevious messageNext messageBottom of page Link to this message

Kdan
Posted on Tuesday, November 01, 2005 - 10:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Pictures!
Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Tuesday, November 01, 2005 - 10:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

http://photos.micronexhaust.com/
Top of pagePrevious messageNext messageBottom of page Link to this message

Xgecko
Posted on Wednesday, November 02, 2005 - 04:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

nice looking and sounding...
Top of pagePrevious messageNext messageBottom of page Link to this message

Trojan
Posted on Wednesday, November 02, 2005 - 06:36 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

For those thinking of getting a Micron, you need to be aware that they now have two seperate models available for the XB series.

The model number HYD-BU01 fits all the XB models except the Ulysses and has had a small redesign of the outlet pipes to fit with the new XB12SS belt guard.

Model HYD-BU02 is just to fit the Ulysses and has the exit pipes angled down by 5 degrees to clear the belt.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tommy_k
Posted on Wednesday, November 02, 2005 - 10:10 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Link works for me. Sounds cool...not what I'm used to at all. I'm just running a Spec. ops pipe and it sounds ALL Harley. This sounds...different...higher tone maybe...def a bit more European/exotic sounding. Have to hear one in person hopefully. I may get one just because it's new, different. Would like to see a couple dyno charts. BTW Indy, you said whole set up weighed 17.5lbs...did you throw the whole stock set up on your scale as well? Just curious. Thanks for the clip.
TK
Top of pagePrevious messageNext messageBottom of page Link to this message

Darktwin79
Posted on Wednesday, November 02, 2005 - 05:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

This sounds...different...higher tone maybe...def a bit more European/exotic sounding.

It is a very deep rumble, border line Ducatish. I can guarantee that sound file is doing no justice for the sound. Before taking the dive to buy one hear it in person first, you will be pleasantly surprised.
J
Top of pagePrevious messageNext messageBottom of page Link to this message

Guzzimon
Posted on Wednesday, November 02, 2005 - 07:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Still can't hear it (on a Mac). Any suggestions?
Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Wednesday, November 02, 2005 - 09:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Guzzimon, PM coming at you, I'll send the file, its not very big.

Also, Typeone got it to work and he has a Mac.

(Message edited by indy_bueller on November 02, 2005)
Top of pagePrevious messageNext messageBottom of page Link to this message

Typeone
Posted on Wednesday, November 02, 2005 - 09:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Guzziman, i had to use VLC on my Mac to listen. not sure why, i have all the goodies installed. running 10.4.3 with latest QT.
Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Wednesday, November 02, 2005 - 09:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Raptor and I installed the pipe today and I'm totally in love with it. As for the sound, think Buell Race pipe with a twist and some more attitude. Those unusual tips add a very pleasing rattle on decel. It idles very quiet. When you get on it, well its just kinda hard to describe. You have to hear it yourself. I can say it is quieter than the Special Ops. I had to wear earplugs with the 'Ops, but not with this one.

STP dyno tells me I definately picked up some power. Power delivery is very linear, I ran it to the rev-limiter several times and it was constant, pulling like crazy all the way. Theres a slight stumble at 1500 RPM when revving it up at idle, but none that I found while riding.

To sum up, I LOVE it. Its a great system. Installation instructions are very good. It took us about 5 hours to do the job. It would have been closer to 3.5, but we ran around for awhile looking for a tool we needed, and we did have a couple "dumba$$" moments.

We also made a video, which I will try to get posted this weekend if possible.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kowpow225
Posted on Thursday, November 03, 2005 - 03:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Right on Pete! Glad to hear it went on OK. It looks pretty crazy from the pics I've seen.
Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Thursday, November 03, 2005 - 09:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Kyle, you could hear/see it in person if you ever come ride with us.

Top of pagePrevious messageNext messageBottom of page Link to this message

Indy_bueller
Posted on Thursday, November 03, 2005 - 09:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Tommy_k The stock pipe/header are still over at Raptors place.....I plan on retrieving them and weighing them sometime before sunday. Stay tuned!
Top of pagePrevious messageNext messageBottom of page Link to this message

Phantom5oh
Posted on Friday, November 04, 2005 - 09:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Just got it to work.

Sounds pretty good, almost like 2 big single 4 stroke dirt bikes running side by side.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kowpow225
Posted on Sunday, November 06, 2005 - 03:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Top of pagePrevious messageNext messageBottom of page Link to this message

Richardcronrath
Posted on Wednesday, November 09, 2005 - 12:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I have special exhaust gaskets made to work with the exhaust, I have been working with Micron for over 8 months developing it. If you have any questions you can Email me. info@racingmotorcycles.com
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration