G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through September 04, 2005 » XB12 plug gap « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Mrmoo
Posted on Wednesday, August 31, 2005 - 07:08 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Just taken my plugs out to give them a clean (5000 service) and gapped them at 35 tho is this correct on a XB12, the service manual I have is for a 9.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brupska
Posted on Wednesday, August 31, 2005 - 08:40 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

My 04 XB12R manual says .035 on the plug gap.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mrmoo
Posted on Wednesday, August 31, 2005 - 11:07 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks for that !! It keeps missing while on choke / warming up and alot more popping on over-run, I have a K&N and drummer pipe, may be Im just paranoid.

Any ideas ?
Top of pagePrevious messageNext messageBottom of page Link to this message

Sparky
Posted on Wednesday, August 31, 2005 - 04:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

The reason it's missing and popping is it's too lean. You freed up the breathing a little with the intake & exhaust mods, now you need a race ECM to help normalize the mixture. Don't be paranoid, be stoichiometric!
Top of pagePrevious messageNext messageBottom of page Link to this message

Fullpower
Posted on Wednesday, August 31, 2005 - 04:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

.035 gap is correct. how did the plug wires look? that is NOT normal behaviour for that engine. the stock ECM will work just fine with your stock engine. a K&N filter and drummer can is WELL within the the range of the stock ECM. you may need to have the TPS zero reset, or possibly have a bad temp sensor or a loose injector lead. and dont worry too much about that "choke"..... there aint one.
Top of pagePrevious messageNext messageBottom of page Link to this message

M1combat
Posted on Wednesday, August 31, 2005 - 04:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Yes, the ECM (stock) is certainly capable of delivering the required amount of fuel to a Drummer equipped bike... BUT... It will only be correct at the same point in the RPM range where you settled the AFV. The rest of the curve will be off a little. A little rich lower than where you settled the AFV and a little lean above that.

The only proper solution at this point is a PCIII. The TFI will only add fuel, and many pipes need fuel removed on the lower end. It's also nice to be able to remove about 15-20% fuel at 0% throttle above 1500RPM. This clears up the popping on decel very nicely.
Top of pagePrevious messageNext messageBottom of page Link to this message

Typeone
Posted on Wednesday, August 31, 2005 - 06:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

On my 05 12S I'm currently running the Drummer, Race ECM, TFI, K&N, stock inner airbox and no snorkel. Plugs are NGK standard 9 series with a .035 gap..... holy crap is my bike a different machine. No 'missing' during warm-up as you mention. Not much help, I realize, but FYI on an almost similar setup.

By the way, I still have mild popping on decel with the Race ECM in but i'm hoping to tune that away with the TFI, its very mild and sounds kinda cool. Few more test runs and it should vanish.

I almost went the PCIII route (loved it on my last bike) but very happy with this setup. She's almost dialed and pulls like crazy.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jonesjd
Posted on Wednesday, August 31, 2005 - 10:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

This is probably a stupid question but what is a tfi, and do I need one? Here is the deal I just ordered a latus pipe, race ecm, K&N filter for my xb12s.
Top of pagePrevious messageNext messageBottom of page Link to this message

M1combat
Posted on Thursday, September 01, 2005 - 11:40 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

A TFI is a device that gives the ability to tune "like" a carburetor, but a carburetor with an open loop mode.

The company that made the TFI IMO didn't employ good testing procedures and the device "works" but the company that sells it doesn't quite understand how it works with the XB. Either that or they know how it works, but they're un-willing to go into the details with their customers for fear of confusing them.

The TFI is a picky little box, but it CAN be used correctly.

The key is to settle the AFV after initial installation with the first three pots at "off". Once that's done, you can adjust the first three pots. If you adjust the fourth pot after the initial "settling" then you need to re-settle the AFV. The further from 7:00 you get with the fourth pot, the greater the likely-hood of causing your AFV to creep to one end of it's scale and that will throw an engine code.

With that combo... You shouldn't "need" one, but a TFI or a PCIII wil certainly give you more power.

There are quirks with the PCIII as well...
Top of pagePrevious messageNext messageBottom of page Link to this message

Jonesjd
Posted on Thursday, September 01, 2005 - 05:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thank you for your repley. I am obviously new to this.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration