G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through May 04, 2005 » Engine light On, Off, On? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

12bolt
Posted on Monday, May 02, 2005 - 08:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Cruzin home Saturday night after work (midnight about 50deg) and my engine light comes on. So I exit at the next ramp to check things out and find nothing obvious. Oil level good, nothing rattling, bike still runs good. So I get back on the interstate and the light goes off. ten minutes later back on, two minutes after that back off. It did this about three times before I made it home.

Next day (sunny 70deg) I road to the races and put about 55 miles on her without the light coming on. That night on my ride back home the light was coming on and going off again!

Any thoughts? Anybody else have this happen? the bike seems to be running the same.
Top of pagePrevious messageNext messageBottom of page Link to this message

Koz5150
Posted on Monday, May 02, 2005 - 09:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Your bike is scared of the dark....
Top of pagePrevious messageNext messageBottom of page Link to this message

12bolt
Posted on Monday, May 02, 2005 - 10:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Or the cold!
Top of pagePrevious messageNext messageBottom of page Link to this message

Odinbueller
Posted on Monday, May 02, 2005 - 10:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

You have an intermittent trouble code that needs to be checked. It may not be anything major, but should still be checked out. Any Buell dealer should be able to check it out. Is it happening while cruising at highway speeds? If so, could be a bad O2 sensor. The O2 sensor is only used when cruising at highway speeds, so if it's happening then, could be that sensor is bad, or maybe just loose connection.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kdan
Posted on Monday, May 02, 2005 - 10:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I had an issue with a jiggly kickstand switch. Sounds like the same thing. I just tightened it and been fine for weeks.
Top of pagePrevious messageNext messageBottom of page Link to this message

12bolt
Posted on Monday, May 02, 2005 - 10:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Yeah so far it has only happened at 70 to 80 mph. I'll check the kickstand switch first then think about taking it to a dealer... uhgg!

Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Cataract2
Posted on Monday, May 02, 2005 - 11:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

The XB12's and 04 XB9's don't have kickstand switches. Get it hooked up to a reader and see what code you have. Or, if you have the service manuel it will have instructions on how to make a device to get the codes.
Top of pagePrevious messageNext messageBottom of page Link to this message

12bolt
Posted on Monday, May 02, 2005 - 11:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Taking the bike to the dealer is worse than going to the dentist! I guess It's time to order that manual.
Top of pagePrevious messageNext messageBottom of page Link to this message

Odinbueller
Posted on Monday, May 02, 2005 - 11:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I hate to see fellow Buellers so disenchanted with the dealer network. If you weren't on a different coast, I'd recommend you bring it over to us. We're trying to be the better (if not best) Buell dealer.

If you really want to retrieve & clear the codes yourself, check the section 4.4 & 4.5 in the service manual (for 2003 models at least) titled checking for trouble codes & check engine lamp diagnostics. The check engine lamp will blink the numeric value of the code. If you don't have one, you really should get the factory service manual. If you have any questions, let me know and I'll help out as best I can.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration