G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through March 24, 2005 » Drummer 12 testing with TFI, progress update « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Kds1
Posted on Thursday, March 17, 2005 - 07:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

So far we have real good numbers , especially down low and good power up top....look at the dyno runs on www.kdfab.com in the gallery under dyno sheets for the 2 new test runs...it will take a little more time but I'll keep you guys posted on the results....

Thanks, Kevin

www.kdfab.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbolt12
Posted on Friday, March 18, 2005 - 12:44 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Nice!

I'll bet it wheelies easily with the mid-range hit.

I would be cool if you could get just a little more on the top, but I realize that would probably kill some low-end and mid-range which would lose my interest as I already have the Jardine (yeah I am greedy and always want more: ).

xbolt12
Top of pagePrevious messageNext messageBottom of page Link to this message

Kds1
Posted on Friday, March 18, 2005 - 06:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Xbolt12,
Like I said I'll keep you posted as I get results.....you can get farther ahead with that low-mid torque curve and check out that almost perfect air/fuel ratio across the board...no spitting , popping not idling , and all that other mess thats annoying....

Thanks, Kevin

www.kdfab.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Kds1
Posted on Friday, March 18, 2005 - 09:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Xbolt12,
Have your bike dynoed so I can tell which way to go, I've only seen one dyno sheet on the Jardine, I'd like to see more than one....

Thanks, Kevin

www.kdfab.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Jerseyguy
Posted on Friday, March 18, 2005 - 09:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Kevin, looks like your work over the winter paid off. That's the best Dyno chart for a 12 I've seen so far. The A/F ratio is incredibly consistent. I bet if we can get the A/F to stay flat but bring it down to 13 or so we'd make even more power. The next step is to prove that our Drummer SS can boast the same performance.
Top of pagePrevious messageNext messageBottom of page Link to this message

Norrisperformance
Posted on Friday, March 18, 2005 - 09:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Steve
They called and reported 93peak hp after installing
a new set of plugs and a increase on the # 3
pot.

Told em to play with the timing.
Let ya know when I find out more.
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellgator
Posted on Friday, March 18, 2005 - 09:26 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

That's what I was waiting for. Drummer is still the best pipe on the market for these motorcycles. That dyno from Norris is between 5-7hp better than any numbers I've seen on our dyno.
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellman39
Posted on Friday, March 18, 2005 - 09:28 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Well Kevin I'm running a D&D and I love the sound. But my interest level is starting to rise on the drummer. When I put the D&D on I left the servo motor and cable intact.

Can you make me one of the new style drummers for a xb12r thats loud?
Top of pagePrevious messageNext messageBottom of page Link to this message

Norrisperformance
Posted on Friday, March 18, 2005 - 09:46 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

The new 12 is louder. I have not listened to a
D&D, so I can’t compare the two.
It's not as loud as drag pipes , but close and has
a unique tunnel thumping sound at idle
Top of pagePrevious messageNext messageBottom of page Link to this message

Kds1
Posted on Friday, March 18, 2005 - 10:31 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Buellman39,
The results you see on the dyno is for the loud Drummer, the next series of tests are going to be for the regular sounding one..you need the tfi and filter and stock ecm or race ecm...one thing to say is that the flat air/fuel curve is not coming from the tfi, its the muffler design thats causing it, it started out at a flat 16:1 ratio and I needed the tfi to get it down to where it is now....

Kevin
www.kdfab.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellman39
Posted on Friday, March 18, 2005 - 10:40 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I,m currently running

desnorkle
K&N
cut airbox
heat blanket
ngk iridium plugs
TFI unit
D&D exhaust

This is on a 2004 XB12R
Top of pagePrevious messageNext messageBottom of page Link to this message

Kds1
Posted on Friday, March 18, 2005 - 10:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Sounds like a good combo, you should be making good power....do some dyno runs to see where you are at now....

Kevin

www.kdfab.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbolt12
Posted on Friday, March 18, 2005 - 01:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

"Xbolt12,
Have your bike dynoed so I can tell which way to go, I've only seen one dyno sheet on the Jardine, I'd like to see more than one.... "

I would like to, but out here in San Diego it costs about $250.00 so it's probably not going to happen until I do some serious mods. Right now I am running the stock ecm (with my servo emulator circuit), cut airbox,Race filter, TFI, cut down snorkel, heat foil on the bottom of the airbox, Jardine RT1 Ti exhaust.

Seat of the pants tells me the Jardine is very weak on the bottom but strong on top. I was a little surprised by Slaughters? post showing Jardine on a dyno and it had less than stock at redline.

If anyone knows of a reasonably priced dyno in southern CA, let me know. I would even travel to Glendale HD/Buell if the price is right!

xbolt12
Top of pagePrevious messageNext messageBottom of page Link to this message

Hogs
Posted on Friday, March 18, 2005 - 01:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

For all those that are tired of their D&d`s Exhaust and want to go to "Drummer" I`ll take your d&d`s off your hands for the right price NO plms. :-)
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbolt12
Posted on Friday, March 18, 2005 - 01:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

BTW Kevin, I hope you did not think I was criticizing your efforts as I am impressed and may eventually change over to the new drummer. Also I did take note of the consistent af ratio. Good job on that one. AF is the main reason I want to get my xb dynoed.

xbolt12
Top of pagePrevious messageNext messageBottom of page Link to this message

Slaughter
Posted on Friday, March 18, 2005 - 01:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Xbolt12,

Glendale is pretty standard on pricing and they have 2 really good Buell techs there now - Eric just got back after serving in the Gulf - he's a good guy - and Marek. I think their dyno is pretty busy.

Call Ernie (extension 128) tell him you heard it from me on Badweb. I don't get a kickback but Ernie can point you to the right guy to get it dyno'd.

Bartels does not have their water-brake dyno running right now so you can't hit/hold a single RPM - just a full-throttle bang-on and roll-off. Good enough for power/torque and tailpipe sniffing but not for detailed tuning. I think the next month, they're getting ready to move the service operation to other quarters so can't say how available their dyno is right now.

One of the more knowledgeable dyno guys on the planet is Louie at L&L motorsports. He has a mobile dyno and is at Willow Springs every race weekend - and most other Western region races in AFM, CCS, WERA. He can be reached through his website. He's based in Littlerock. I think some basic prices are on his website. He does all the dyno work for Roadracing World for testing. He also sells VP race fuel and is a straight-shooter to ask all those questions about "race gas" v. "pump gas" that everybody seems to have.

If I remember, a single pull for power/torque/exhaust sniffer is $25

www.landlmotorsports.com

(Message edited by slaughter on March 18, 2005)
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbolt12
Posted on Friday, March 18, 2005 - 02:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

BTW Kevin, I hope you did not think I was criticizing your efforts as I am impressed and may eventually change over to the new drummer.

xbolt12
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbolt12
Posted on Friday, March 18, 2005 - 02:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Oops my bad!


xbolt12
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbolt12
Posted on Friday, March 18, 2005 - 02:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks Steve!

xbolt12
Top of pagePrevious messageNext messageBottom of page Link to this message

Kds1
Posted on Friday, March 18, 2005 - 02:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Xbolt12,
I would never think you meant any harm in your posts towards me, none was meant towards you or anyone on this site or associated with it, I'm trying to make the best exhaust for your Buells at an affordable price because I've bought everything once too and I know how they perform...
Everyone has a preference and that's what makes us all different, but I was told by our good friend Bubba that the Buell people need a great slipon that will perform like a full system that we all can afford...so, here it is...

www.kdfab.com

Kevin
Top of pagePrevious messageNext messageBottom of page Link to this message

Spyder12s
Posted on Friday, March 18, 2005 - 05:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

kev ...I just posted this on your site but I am woundering if you or anyone have any Db tests on either of the drummers ??
Top of pagePrevious messageNext messageBottom of page Link to this message

Bobup
Posted on Friday, March 18, 2005 - 05:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

XBOLT12.....The dealer up here in Fremont wants $400 to dyno tune a bike...so $250 is not too bad to me right now...
Top of pagePrevious messageNext messageBottom of page Link to this message

M1combat
Posted on Friday, March 18, 2005 - 05:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

$250 is what they get over here for a tune, or $100/hr just for general dyno work/runs...
Top of pagePrevious messageNext messageBottom of page Link to this message

Norrisperformance
Posted on Friday, March 18, 2005 - 06:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Ray Price HD in Raleigh NC
charges 32.50 1/2 hour for a base line.
6 or 7 pulls, no tuning.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kds1
Posted on Friday, March 18, 2005 - 07:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

spyder12s, I know the loud one is loud as he77, and I wouldn't begin to tell you the db rating....I have not a clue...

www.kdfab.com

Kevin
Top of pagePrevious messageNext messageBottom of page Link to this message

Norrisperformance
Posted on Saturday, March 19, 2005 - 01:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I know it's hard on the ears, but man it sounds
good. I'll get the db test next week and let you guys know.
Top of pagePrevious messageNext messageBottom of page Link to this message

Spyder12s
Posted on Sunday, March 20, 2005 - 01:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

thanks man ...this state is getting "strict" for a better choice of words...
Top of pagePrevious messageNext messageBottom of page Link to this message

Tommy_2stroke
Posted on Sunday, March 20, 2005 - 02:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Yes, Kevin, not TOO loud. I'll be sending you mine for modification (12 version) as soon as you have the kinks worked out. Perhaps the "loud bunch" will want something radical, but I prefer to keep it within reason and not have the neighbors callin' the noise police on me every morning... :-)
Top of pagePrevious messageNext messageBottom of page Link to this message

Norrisperformance
Posted on Sunday, March 20, 2005 - 07:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

When you’re setting the timing for max performance, do you need a HD
digital tech or can you advance or retard the pickup? It seems if you move
the pickup the injectors would be out of sync.

And what’s the best plug gap to run?
2004 XB12

Thanks in advance!
Top of pagePrevious messageNext messageBottom of page Link to this message

Norrisperformance
Posted on Sunday, March 20, 2005 - 09:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

www.kdfab.com

MuffDoctor.jpg
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellman39
Posted on Tuesday, March 22, 2005 - 09:26 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Kevin,

I'm sending my pipe out today. You should have it friday, I will include Everything in the box (moneyorder & what side I want the outlet)
I'll call you.

Thanks
Chad

Top of pagePrevious messageNext messageBottom of page Link to this message

Bluefirebolt
Posted on Tuesday, March 22, 2005 - 06:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

any idea when the stainless steel ones will be ready?on my old one the paint has burned of completely at the end(9version)
Top of pagePrevious messageNext messageBottom of page Link to this message

Kds1
Posted on Tuesday, March 22, 2005 - 08:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Stefaan, It's going slow right now but I'm trying to get everything moving faster...I'm building these things by hand by myself and I'll do maybe 10 at a time and try to keep up.....I'll be sure to post it when they are ready...

Thanks, Kevin

PS. Take that thing off there and paint it for now , I know you do some paintwork!!!!!

www.kdfab.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluefirebolt
Posted on Wednesday, March 23, 2005 - 02:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

yeah i could do that of course,but i'm kinda lazy now,the wheater is so good here for the moment, the time i'll last , i'll rather be on my bike than working on it
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration