G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through October 31, 2004 » Sparkplugs wires « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Jabrien00
Posted on Wednesday, October 27, 2004 - 01:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

can anyone direct me to where I can get a good sparkplug wires and sparkplugs and can someone also tell me the part# for it thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Lovematt
Posted on Wednesday, October 27, 2004 - 08:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

some people may not like them but I have had good luck with the Pro Series (splitfire style) and .035 gap...the bike is really responsive.

This is on a mostly stock XB9R with stock plug wires (fiberglass wrapped for protection) and drilled 12 airbox and drilled exhuast.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ingemar
Posted on Thursday, October 28, 2004 - 05:25 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

If I want new wires, I will most likely get bosch or ngk wires, and put on the stock plug thats on the coil, with ngk plugs on the spark plugs. Sparks are already ngk.
Top of pagePrevious messageNext messageBottom of page Link to this message

Trojan
Posted on Thursday, October 28, 2004 - 06:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Accel 300+ wires from the X1 fit the XB series and are a definite improvement over stock. In the UK they are around GBP20 (US$36?) but are probably cheaper in the US coz they are made there.
We have used them on all our Buells and had no problems. We use them with NGK DPR9IEX9 iridium spark plugs.
Top of pagePrevious messageNext messageBottom of page Link to this message

Odie
Posted on Thursday, October 28, 2004 - 09:29 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Trojan, what year X-1?? Thanks...Odie
Top of pagePrevious messageNext messageBottom of page Link to this message

Wyckedflesh
Posted on Thursday, October 28, 2004 - 12:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Drag Specialties lists PN: DS-242676 for All models 99-02 for 8mm Accel 300+ plug wires $23.95 : )
Top of pagePrevious messageNext messageBottom of page Link to this message

Jabrien00
Posted on Friday, October 29, 2004 - 01:09 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I just installed a new cables and at first it ran fine at idle then few hours later when I started the bike the lights are dimming now and it seems like it's dying and when I run the bike everything runs good and nothing is wrong with it. I think it's the connection to the coil I think it's not sitting properly. Is there any simple way to insert that front cable in and I kinda gave on after an hour of cursing.
Top of pagePrevious messageNext messageBottom of page Link to this message

Odie
Posted on Friday, October 29, 2004 - 02:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Get a pair of spark plug wire pliers. The longer the better. They should push the coil end of the wire on just fine. You can use a long pair of pliers/needle nose but just be careful not to put too much pressure on the wire and cut it....Odie
Top of pagePrevious messageNext messageBottom of page Link to this message

Fullpower
Posted on Friday, October 29, 2004 - 04:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

lights are dimming now you said. this is not a spark plug wire problem.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ingemar
Posted on Friday, October 29, 2004 - 05:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

How much did you take it apart?

Did you take the airbox base off to get better access? If so, I'd check the wire harnass that runs there.

If something goes wrong right after you changed something, look around the area you were working.

Like fullpower said, if lights are dimming, I wouldn't think of spark plug wires etc, unless it's shorting but then the bike wouldn't run.

I hate electrical problems .... had to deal with 2 shortages ...
Top of pagePrevious messageNext messageBottom of page Link to this message

Jabrien00
Posted on Friday, October 29, 2004 - 05:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

yeah but when I ride the bike it's not doing anything but if it's on idle then the lights dims a little bit but if the engine is still cold and I start it it seems like it is going to die and the lights dims. This is why I am assuming that it had to do with cable when I installed the cables the front did not click in place and the rear I heard a click when I installed the cable in it. I am getting irritated and I want to vent my anger on this bike maybe pick a sledge hammer and just have a ball with this damn bike. It seems like when I fix one problem the another one will surface don't get me wrong I like the bike it's just that maintenance wise this bike is a bish to work on.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ingemar
Posted on Friday, October 29, 2004 - 05:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

take it easy man. Vent your anger on the bike and you'll regret it in the morning. Try and learn from it.

I think my light flickers a bit when its cold and idles.

What is your idle set to?

Could it be the battery is nearly empty? So when you run the bike the engine spits out enough energy to run the lights and all, but when it idles, it's just on the edge so you would see the lights flicker?

Dunno, just thinking...
Top of pagePrevious messageNext messageBottom of page Link to this message

Jabrien00
Posted on Friday, October 29, 2004 - 07:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I am going to take it apart again this weekend and try to resolve the problem I am having.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fullpower
Posted on Friday, October 29, 2004 - 07:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

dude, relax, have a beverage, read through the appropriate section of the service manual. begin work when you are ready to enjoy the process. if maintenance is not enjoyable and/or rewarding for you personally, then try to hire a competent 3rd party to do your service. expect to pay them. that is what makes the economy work. best of luck and try to enjoy the journey. dean
Top of pagePrevious messageNext messageBottom of page Link to this message

Jabrien00
Posted on Friday, October 29, 2004 - 07:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

don't get me wrong I like to work on a bike but not that bish and I do like to learn and prefer to do the work on my bike but c'mon just for a simple cable wires to put on the coil. You don't see that ish happening to a jap or euro bikes I think they built there bikes with more common sense. I am sorry to bish but this is the most difficult bike I ever worked on.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fullpower
Posted on Friday, October 29, 2004 - 07:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

ja mon, 'ave another red stripe mon.....
Top of pagePrevious messageNext messageBottom of page Link to this message

Fullpower
Posted on Friday, October 29, 2004 - 08:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

jab: in all seriousness, i thought it was rather inconvenient access to the sparkplugs myself, but then on further reflection, i had to note that after 10,000 miles i went to the trouble of replacing spark plugs that came out so clean as to be indistinguishable from the new in box replacement spark plugs. so the point is these bikes DONT NEED FREQUENT SPARK PLUG SERVICE. this is really not that big a deal, you need to clean the air filter once a year anyway, so attend to your spark plugs at that maintenance break, when you are already 2/3 of the way in there anyway. this is a modern fuel injected four stroke engine; you just dont have to diddle your spark plugs that often to really snivel about their placement. if you aint diggin the machine, perhaps you would be happier with another.
Top of pagePrevious messageNext messageBottom of page Link to this message

Xb9er
Posted on Friday, October 29, 2004 - 10:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Spark Plugs: NGK Iridium Spark Plug #KR8AI ($6.50 ea. at Advance Auto Parts).

Look in the Service Manual and you will find drawings and instructions on how to properly remove and install everything on the bike. If you don't have a Service Manual yet, get one. It is worth the money.
Mike.
Top of pagePrevious messageNext messageBottom of page Link to this message

Wyckedflesh
Posted on Saturday, October 30, 2004 - 12:17 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

And keep in mind there is a service manual in the parts for sale classifieds http://www.badweatherbikers.com/buell/messages/21/80936.html?1098277413 I am sure the owner would probably trade the Lighting manual listed for the firebolt one he also has...
Top of pagePrevious messageNext messageBottom of page Link to this message

Jabrien00
Posted on Saturday, October 30, 2004 - 02:10 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I do have the manual and I would've gotten the cables in the coil with ease if the screw for the coil wasn't stuck. Thank you guys sorry for being such a pain but I guess I have no choice but to curse more until I get that thing together
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration