G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through October 21, 2004 » '03 XB9R transmission breather hose routing question « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Xb9er
Posted on Friday, October 15, 2004 - 01:50 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I posted this previously in the Knowledge Vault but did not get any responses.

The transmission breather hose runs from the top of the trans behind the rear cylinder, loops to the right of the bike then back to the left side of the bike, then it follows the subframe under the seat and just lays horizontally, under the battery. I am not sure of the length but it must be 24 to 36 inches. Is it necessary for it to be so long? I would like to eliminate the hose because it's just in the way.

What I would like to do is cut the hose down to about 3-4 inches then clamp on an inverted U pipe to it so it vents but won't get water in it when it rains. Anyone see any problems with this? Has anyone done anything similar?

Mike.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fullpower
Posted on Friday, October 15, 2004 - 02:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

no i have not. but the engineers must have had a good reason for including 2 feet of hose under there. that would be 10,000 feet for a years production. you can bet they would have spent money elsewhere if they thought the breather hose unnecessary.
Top of pagePrevious messageNext messageBottom of page Link to this message

Xb9er
Posted on Saturday, October 16, 2004 - 11:58 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Spoken like a true a-hole. Can anyone else respond?
Good answer except if it was mandated by the EPA.
In that case, like the snorkel, I would rather do away with it.

Mike.
Top of pagePrevious messageNext messageBottom of page Link to this message

Dj_rider
Posted on Saturday, October 16, 2004 - 12:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

belive it or not, my breather tube melted in half from sitting on the inside of the rear header...a quick fix thou would be to take a length of brake line (or any metal tubing) about 4 - 6 inches and cut your breather tube where it goes past the rear header, and attach both ends of the tube and brake line with hose clamps...another great idea from the guys at the Drummer Factory: )
Top of pagePrevious messageNext messageBottom of page Link to this message

Glitch
Posted on Saturday, October 16, 2004 - 12:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Spoken like a true...
There was no need for this.
Top of pagePrevious messageNext messageBottom of page Link to this message

Xb9er
Posted on Friday, October 29, 2004 - 02:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I have searched the knowledge vault on this and it looks like the one requirement is to make sure the trans breather can breathe freely in and out. Connecting it with a tee to the crankcase breather hose also seems like it would be asking for trouble.

It looks as though I will be able to cut the hose down to just a few inches and put on a small breather filter on top of it. It should fit nicely behind the rear cylinder.
Mike.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration