Author |
Message |
Mitch_xb9s
| Posted on Tuesday, September 14, 2004 - 11:47 pm: |
|
First off does anybody live near River Falls, WI? And does anybody have any suggestions that a 16 year old kid could pull off to boost the success of Buell in a town where I am 1 of only 3 buell owners. I know we need some actual signs that are bigger then decals on a door. We also need a descent selection of Buell accessories. On our floor right now we have a 04' XB12S&R and a 02' X1 and a 05' XB9SX. Any ideas would be appreciated. |
Maverick9s
| Posted on Wednesday, September 15, 2004 - 12:38 am: |
|
Mitch, 3 Buells...not too bad. I live southeast of the cities and I don't see many Buells at all. Great idea to try and promote these bikes, it's not as easy as it may sound. Good luck with your quest! |
Mitch_xb9s
| Posted on Wednesday, September 15, 2004 - 12:48 am: |
|
Where southeast of the cites? And nice bike. Reminds me of mine. |
Maverick9s
| Posted on Wednesday, September 15, 2004 - 12:51 am: |
|
Near Hastings/Prescott. |
Buckinfubba
| Posted on Wednesday, September 15, 2004 - 08:32 am: |
|
Mitch since your in the dealer world, call daveS or email him. he has alot of great ideas and is way willing to share. He's much better than corporate. good luck |
Daves
| Posted on Wednesday, September 15, 2004 - 11:29 am: |
|
Call me anytime Mitch. I'll talk your ear off about Buells! 1-920-757-1651 ask for Dave in the sales dept. |
Ted
| Posted on Wednesday, September 15, 2004 - 01:56 pm: |
|
You indicated all reflectors were taken off. How are the fork leg ones removed ? Any marks left behind ? thx |
Nedwreck
| Posted on Wednesday, September 15, 2004 - 02:55 pm: |
|
The only Buells I see are on the floor at the Hardly shop. I had a BRAG meeting last night. Took about 30 seconds. Lessee, there was me and... uh, me. Bob |
Odie
| Posted on Wednesday, September 15, 2004 - 03:02 pm: |
|
Ted, just peel them off and then remove the remaining residue with Goo-gone.......Odie |
Mitch_xb9s
| Posted on Wednesday, September 15, 2004 - 03:53 pm: |
|
Ted it's just the way odie said. Just grab a corner and twist the entire reflector a little to loosen it up. Then pull it off and take off the residue with goo gone. I had no marks left behind. Just don't take a screw driver and pry it off. |
Ted
| Posted on Wednesday, September 15, 2004 - 05:28 pm: |
|
Thanks guys. |
Signguyxb12
| Posted on Wednesday, September 15, 2004 - 05:45 pm: |
|
take the rears off also loosen the rear blinkers the reflectors fall off( like EB wanted me to do it) step on reflectors cut the nub on the blinker with a razor tighten 'em up |
Crip2nite
| Posted on Wednesday, September 15, 2004 - 05:54 pm: |
|
WTF???? I drive in the dark 85% of the time. I need all the reflectors I can get!! |
Signguyxb12
| Posted on Wednesday, September 15, 2004 - 05:57 pm: |
|
"Knight Hooligan" sounds like super hero |
Stealthxb
| Posted on Wednesday, September 15, 2004 - 05:57 pm: |
|
Ted... u can use a blow dryer to warm the sticky stuff up a little and they come off real easy. |
Easy_rider
| Posted on Wednesday, September 15, 2004 - 11:06 pm: |
|
Nedwreck, They've threatened to send me to Forest. I'll look you up if I ever get that way. Any door prizes for whoever brings the most visitors? |
Altima02
| Posted on Wednesday, September 15, 2004 - 11:45 pm: |
|
More Buell T-Shirts |