G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through July 04, 2004 » Okay.. not a good fricking day... « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Tatsu
Posted on Tuesday, June 29, 2004 - 02:03 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Was installing some new heel guards for the passenger and when I went to remove the little screws, the heads rounded off and now I can't get the screws out. Any suggestions on removing the little screws that hold in the heel guards for the passenger.

Semper Fi
Tatsu
Top of pagePrevious messageNext messageBottom of page Link to this message

420at145mph
Posted on Tuesday, June 29, 2004 - 02:13 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

easy out
i still havent figured out what im gonna do to put my seat on drilled the head off one of the screws and the threadsert is still there just spinning

edited by 420at145mph on June 29, 2004
Top of pagePrevious messageNext messageBottom of page Link to this message

Wyckedflesh
Posted on Tuesday, June 29, 2004 - 02:15 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Sears has a wonderful tool that works EXTREMELY well for that the Drill OUT Power Extractor. I got the 3 piece set for 19.99 and its already earned its keep.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tatsu
Posted on Tuesday, June 29, 2004 - 02:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Okay off to Sears to get that Drill out.

Tatsu
Top of pagePrevious messageNext messageBottom of page Link to this message

Kevinfromwebb
Posted on Tuesday, June 29, 2004 - 11:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Yea, I had that same problem when I put my black heel guards on, had to use an ease out to get on of the screws out... Pretty soft material, and they were over torqued... Weirdest thing about it though, was I went to my local hardware store and they had an exact replacement screw...
Kevin
Top of pagePrevious messageNext messageBottom of page Link to this message

420at145mph
Posted on Tuesday, June 29, 2004 - 11:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

any suggestion how to get out the threadsert from the seat on a xb9r?
got the screw head dremmld off but now i got half a screw stuck in a threadsert that just keeps spinning
Top of pagePrevious messageNext messageBottom of page Link to this message

M1combat
Posted on Wednesday, June 30, 2004 - 12:24 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

.45
Top of pagePrevious messageNext messageBottom of page Link to this message

420at145mph
Posted on Wednesday, June 30, 2004 - 01:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Top of pagePrevious messageNext messageBottom of page Link to this message

Tatsu
Posted on Wednesday, June 30, 2004 - 02:00 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

420..

Maybe you can get a tiny drill bit and drill the screw out piece by piece. I guess the out option would be to use the same size drill as the screw. Drill it out, then re-thread the hole with a slightly larger threader.

Semper Fi
Tatsu
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellgator
Posted on Wednesday, June 30, 2004 - 10:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

.45



Top of pagePrevious messageNext messageBottom of page Link to this message

Reepicheep
Posted on Wednesday, June 30, 2004 - 11:34 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Personally, I think the .45 comment was totally irresponsible.

(that is much closer to a 9mm bolt ; ) )
Top of pagePrevious messageNext messageBottom of page Link to this message

M1combat
Posted on Wednesday, June 30, 2004 - 12:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I figured as much... but a 9mm wouldn't even scratch the paint would it? ; )
Top of pagePrevious messageNext messageBottom of page Link to this message

420at145mph
Posted on Wednesday, June 30, 2004 - 12:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

u people should REALLY quit your day jobs and go on tour as stand up comedians
Top of pagePrevious messageNext messageBottom of page Link to this message

Trevorxb9s
Posted on Wednesday, June 30, 2004 - 12:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I had the exact same issue...I even went to Sears and got the remover kit. Didn't work...The problem is that the folks at Buell use lock tight on everything. I ended up taking my bike over to a friends shop and having him tack weld a small piece to what was left of the screw and then removed them. I called him...he said that a typical shop would probably charge about $20-$30 bucks...just thought I'd through my 2 cents in!
Top of pagePrevious messageNext messageBottom of page Link to this message

Bomber
Posted on Wednesday, June 30, 2004 - 12:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

420 -- you can often geet things to stop spinning by peening lightly with a drift of cold chisel (and a hammer, pistol butt, or larger rock) . . .

once things are immobilized, those screws are likely a very low grade, and would be easy to drill out . . . .

Top of pagePrevious messageNext messageBottom of page Link to this message

420at145mph
Posted on Wednesday, June 30, 2004 - 01:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

thanks
im gonna go get a big rock and start smackin my frame
heh i get the idea tho
Top of pagePrevious messageNext messageBottom of page Link to this message

Signguyxb12
Posted on Thursday, July 01, 2004 - 07:56 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

FYI: The other way to remove toc tighted bolt is to use heat (may screw up powder coating)
Top of pagePrevious messageNext messageBottom of page Link to this message

Leeaw
Posted on Thursday, July 01, 2004 - 08:03 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

The heat trick was what the dealer used on my M2 when there was nothing but an act of god that would get my front rotor off.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration