Author |
Message |
Wildman4x4nut
| Posted on Monday, October 10, 2011 - 07:28 pm: |
|
I know a lot of people have talked about this but I finally got all the parts and got around to installing this.I installed the LARGE scoop that come with the ULY comfort kit. I got all the parts from my local Harley dealer. This was 6 months ago so I do not know if the parts are available any longer. Large Scoop part#M0851.7AA Inner Scoop part#M0852.7AA and 3 button head screws. I don't have the part # for them anymore. I found the part# AN1005.3FSS And a BTW the screws are 10-32 x 1/2" long just in case you want to buy them at Ace or Home Depot. So here is the process for installing the scoop. First you have to remove the plastic piece that runs along side the engine. Here it is removed just sitting there. Next install the inner scoop part. I had to start the lower screw first to get it installed. You reuse the screws you removed. Next install the outer scoop. You use the 3 button head screws and reuse 1 torx screw that you removed. Then a few pictures of the both scoops. Yes they don't match where some of the $250+ ones do but for under $100 I like it. This is a quick under an hour easy mod. (Message edited by wildman4x4nut on October 10, 2011) (Message edited by wildman4x4nut on October 10, 2011) |
|