Author |
Message |
Snuggyph1
| Posted on Friday, August 27, 2010 - 07:27 pm: |
|
I'm thinking of reworking my whole handlebar setup with bars, grips, hand guards, mirrors, and possibly new switches. Has anyone given thought to using something like these: http://store03.prostores.com/servlet/peakmoto/the- 4300/Right-Hand-Starter-Stop/Detail http://store03.prostores.com/servlet/peakmoto/the- 703/ENDURO-MINI-MOTORCYCLE-TURN/Detail Thanks for any info. |
Froggy
| Posted on Friday, August 27, 2010 - 07:51 pm: |
|
If you are gonna go with an aftermarket switches setup, pick something that isn't so boring looking |
Iamarchangel
| Posted on Friday, August 27, 2010 - 08:01 pm: |
|
Good place to post your handlebar set up, Froggy. Iirc, it's NASA design, lol. |
Froggy
| Posted on Friday, August 27, 2010 - 10:26 pm: |
|
The controls (or whats left of them) are still stock though. If you thought that was NASA, you should see my computer with 5 monitors hooked up |
Snuggyph1
| Posted on Friday, August 27, 2010 - 10:35 pm: |
|
Sorry NASA lovers- I'm trying to simplify by controls. Ha ha. Just looking for info about the technical aspects of hooking up alternative switches. |
Froggy
| Posted on Friday, August 27, 2010 - 10:53 pm: |
|
It shouldn't be that hard. My guess that you may have to change the connectors or splice the wires, but nothing complex. Only thing I would have concern over is the kill switch side, the throttle tube goes under the switches, so you would want a similar setup there. |
Sifo
| Posted on Saturday, August 28, 2010 - 12:09 pm: |
|
Or a new compatible throttle tube. |
|