G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through May 20, 2009 » Help with the Race ECM « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Buelltastic
Posted on Tuesday, May 12, 2009 - 03:11 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

So I sold a new in the box Race ECM to a fellow. I just received this response from him: ---- "just got around to installing ECM this weekend... install it. turn key on and check engine light comes on and stays on while running... ran a code reading on the ecm says EEPROM failure... ECM's bad... went back to install my old ECM and works and runs perfectly fine" ----- He mentions nothing about a TPS reset and to my knowledge, mainly info from this forum, and experience this is a must. Does anyone know if this would be the typical result and code that would flash. I am not familiar with the codes nor have I ever installed a Race ECM w/out a TPS reset. Since he did not mention a reset it sounded like this could be the problem to me. Only other thing I could think of is a defective ECM. Any and all knowledge would be much appreciated. Thank you all.
Top of pagePrevious messageNext messageBottom of page Link to this message

Id073897
Posted on Tuesday, May 12, 2009 - 03:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Get it back, check with your own bike.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ratbuell
Posted on Tuesday, May 12, 2009 - 08:06 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

TPS reset (or lack thereof) shouldn't cause an EEPROM error, just a funky idle and running condition.

+1 on try it on your own bike to verify.
Top of pagePrevious messageNext messageBottom of page Link to this message

Teeps
Posted on Tuesday, May 12, 2009 - 10:35 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Internal failures can also be caused by incorrect voltage.
If the DTC can be cleared and does not reset, soon as power is connected. There is likely nothing wrong with the ECM.
Top of pagePrevious messageNext messageBottom of page Link to this message

Spatten1
Posted on Tuesday, May 12, 2009 - 11:03 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Is the year and model of his bike the same?
Top of pagePrevious messageNext messageBottom of page Link to this message

Id073897
Posted on Tuesday, May 12, 2009 - 03:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Is of no matter.
Top of pagePrevious messageNext messageBottom of page Link to this message

Buelltastic
Posted on Tuesday, May 12, 2009 - 03:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I'm sure his bike is either an '03 or '04 XB9 based on the questions he asked me in refrance to the model number of the ECM. which was 32801-02Y.
Top of pagePrevious messageNext messageBottom of page Link to this message

Xoptimizedrsx
Posted on Wednesday, May 13, 2009 - 04:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

what Gunter said ID#######, get the unit in your hands to check. If needed i can get you the ecm file to that ecm then reflash it.

then reset the tps to your bike and test.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration