Author |
Message |
Bikertrash05
| Posted on Wednesday, March 25, 2009 - 01:30 am: |
|
Ok, the bright yellow shock REALLY sticks out the blacked out '09 Scg. I searched and found that Krylon Fusion had been used on a rear shock, but not road tested. Any suggestions? |
Rpm4x4
| Posted on Wednesday, March 25, 2009 - 02:05 am: |
|
You mean coil spring? Ive painted many coils with car paint with no problems to date. |
Ochoa0042
| Posted on Wednesday, March 25, 2009 - 02:21 am: |
|
does the paint flex enuff for the shock? |
Lonexb
| Posted on Wednesday, March 25, 2009 - 05:40 am: |
|
you could have it powder coated. |
Bikertrash05
| Posted on Wednesday, March 25, 2009 - 07:42 am: |
|
When I searched, Black_Sunshine used Krylon Fusion and did not remove the spring, just masked off the shock. He never did give a road test report, so I was wondering if Krylon was flexible enough for the spring. |
Mortarmanmike120
| Posted on Wednesday, March 25, 2009 - 09:01 am: |
|
If that doesn't work maybe you could wrap it in some kinda high adhesive tape?? Something like black 100mph tape. just an idea if the paint doesn't work. Yeah, I've been called a redneck. |
Fastxb12r
| Posted on Wednesday, March 25, 2009 - 09:41 am: |
|
Make sure if you paint it you dont get paint on the shock shaft or it will destroy the seal on the shock. |
Rpm4x4
| Posted on Wednesday, March 25, 2009 - 01:15 pm: |
|
does the paint flex enuff for the shock? It never has yet on any rig Ive built. Ive done it to every off road buggy Ive built and those springs flex to solid. Ive done it with rattle can, and base clear. |
Ochoa0042
| Posted on Wednesday, March 25, 2009 - 01:22 pm: |
|
are you trying to hide the shock Btrash? usually for motorsports the brakes and shocks and whatknot are something to show off ya know |
Bikertrash05
| Posted on Wednesday, March 25, 2009 - 01:50 pm: |
|
Ochoa, your bike is a little more flashy then mine, and the yellow spring looks out of place:
|
Old_man
| Posted on Wednesday, March 25, 2009 - 02:07 pm: |
|
Flat black paint from a spray can should hold up fine. Mask well all but the spring. |
Bikertrash05
| Posted on Wednesday, March 25, 2009 - 02:55 pm: |
|
Thanks for the comments. This weekend there is a chance of snow, perfect time to do some painting. I'll be using satin black Krylon Fusion and post the results. |
Stuntmanryan
| Posted on Wednesday, March 25, 2009 - 06:58 pm: |
|
yeah i used a gloss black rust tough krylon paint on my old honda's coils and never had a problem with cracking/flackng |
Bikertrash05
| Posted on Monday, March 30, 2009 - 02:07 pm: |
|
Ahh, no more unsightly yellow spring!
|
Lonexb
| Posted on Monday, March 30, 2009 - 06:17 pm: |
|
Bikertrash05 wow. nice to see i'm not the only one into rc crawling. and blacked out buells! berg axles or custom clod? 2.2 or super? brian |
Bikertrash05
| Posted on Tuesday, March 31, 2009 - 01:21 am: |
|
Lonexb, checking out "Brass Knuckles" on my picturetrail page? That would be a custom clod with Integy gear cases, super class, and a Hustler chassis. Unfortunately, I sold it, along with a few others, they just can't compete with motorcycles and ATVs. I still have the TXT-1, TTR Stampede, funny car, XXX-T, and MicroRS4. |
Lonexb
| Posted on Tuesday, March 31, 2009 - 05:46 am: |
|
jim, nice. i have been thinking about building a MOA. i really like the pimp cane stick with clod axle set up. up till now i have just been running shafties. axial ax10 and the losi mrc. got any clod axles you might want to trade for some buell parts? brian |
Ourdee
| Posted on Tuesday, March 31, 2009 - 01:19 pm: |
|
This is a little late as you are done. I've died plastic stuff black with RITT Dye. Is the spring plastic coated? Isn't that what powder coating is? |
Andymnelson
| Posted on Tuesday, March 31, 2009 - 01:52 pm: |
|
That's what basically all paint is. Only real difference is the application method. |
Jraice
| Posted on Tuesday, March 31, 2009 - 10:08 pm: |
|
I would love to make my spring red to match my red Ss but I am worried about getting paint in the wrong places with it installed in the bike... Not to bad? |
Bikertrash05
| Posted on Wednesday, April 01, 2009 - 01:26 am: |
|
Jraice, I removed the shock from the bike, and was thorough with my masking. Are you thinking of painting the spring with the shock still on the bike? Don't think I would suggest that. If you look close at an awkward angle you can see a glimpse of yellow, but it was basically a free mod, so I ain't complaining. |
Jraice
| Posted on Wednesday, April 01, 2009 - 01:35 am: |
|
How much work and what tools are needed to remove the shock? Mine is white and I would paint it red which would work fairly well I would imagine. I am in no hurry to do this mod but I think it would make the bike look a lot better, even my dad mentioned how the shock should've been red to match the body work like the red shock on my last ride which had red accents as well. I believe the high performance suspension kit has a red shock but I'd rather just paint this one as I think it rides just great, no need to go stiffer. |
Xl_cheese
| Posted on Wednesday, April 01, 2009 - 10:55 am: |
|
Get these bulbs for your blinkers and remove the amber plastic inside: http://www.sylvania.com/ConsumerProducts/Automotiv eLighting/HighPerformance/SilverStarSignal/default .htm |