G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through September 30, 2008 » Need a part number! « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Red_chili
Posted on Wednesday, September 24, 2008 - 09:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Like a good boy I first posted in the Knowledge Vault. And when I get an answer I will post that in the Knowledge Vault. But since I have waited weeks for answers there, and gotten them in minutes here and on BB&D, I will also post here - so that way I'm covered, right? And the KV will also be updated, right?


The local dealer looked and looked, and could not find the part number for the little plastic push pins that hold the wiring harness to the frame (XB9S in this case, but the same for all XBs).

Anybody got the part number? I don't think I will be 'lucky' and be able to reuse them.
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellinachinashop
Posted on Wednesday, September 24, 2008 - 10:13 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

"15) C0037.02A8 STRAP, rear wire harness mount"

This came from the 08 parts manual, page 115, SWITCHES, SENSORS & ELECTRICAL CONNECTORS
Top of pagePrevious messageNext messageBottom of page Link to this message

Red_chili
Posted on Wednesday, September 24, 2008 - 02:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hmmm... those are the push pins used all over the place? They aren't straps, they are plastic push pins.
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellinachinashop
Posted on Wednesday, September 24, 2008 - 02:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

in the pic below, I gave you the part no for #15. This isn't it? You need the part no for #14?

"14) C0033.02A8 FASTENERS, tree, plastic (black) (7)"



(Message edited by buellinachinashop on September 24, 2008)
Top of pagePrevious messageNext messageBottom of page Link to this message

Red_chili
Posted on Wednesday, September 24, 2008 - 02:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

That looks like them!
Called the dealer, looks like he thinks he found it but with a different P/N:
11785

Seems like a short P/N, but he has the ones you mention, so between them I am covered! He says the shaft diameter is the difference. Possibly one is used in the rear, and the other is used elsewhere?

Thanks VERY MUCH - I will post up which one works.
Top of pagePrevious messageNext messageBottom of page Link to this message

Red_chili
Posted on Thursday, September 25, 2008 - 09:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

C033.02A8 is definitely the right part number. Thanks, Guys!

Got the old harness out last night, and started hooking up the new one. I noticed that my 'new' harness passed QA in 2003, so any changes in manufacture are not in it. Weren't there some 'weak points' in the 2003 harness that I could address now, while it is easy?
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellinachinashop
Posted on Thursday, September 25, 2008 - 09:46 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

If you don't mind me asking, how much is a new harness?
Top of pagePrevious messageNext messageBottom of page Link to this message

T9r
Posted on Friday, March 16, 2012 - 06:15 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

This part can also be found at Graingers.com as Push in Rivet, Standard, 3/16" part number: 4FXT1

Info from their webpage:
Push In Rivet, Standard, Round, Rivet Material Nylon, Rivet Length 0.480 In, Head Dia. 0.437 In, Grip Range 0.030 to 0.312 In, Hole Size 3/16 In, Temp. Range -40 to 185 F, Color Black, Application For Fastening Metal, Wood, Circuit Boards, and Plastic Panels, Locking, Package Quantity 20

Grainger Item # 4FXT1
Price (pk.) $6.82
Package Qty. 20
Brand MICRO PLASTICS
Mfr. Model # 27RT187550

Ship Weight (lbs.) 0.02
Catalog Page No. 3044 catalog
Country of Origin
(Country of Origin is subject to change.) USA
[Push In Rivet, Std, 3/16 In, PK20]
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration