Author |
Message |
Bagoxcalum99
| Posted on Wednesday, August 13, 2008 - 09:36 pm: |
|
Hey guys, I just chopped my cheesegrater and got everything hooked back up and it was working great! Then I went back out a little later, and my tail light, brake light, turn signals and dash lights and guages quit working. They only dash light that works is the high beam indicator. I checked all the fuses and wiring and I'm stumped. Any ideas? Thanks guys, Matt |
Xb9er
| Posted on Wednesday, August 13, 2008 - 09:37 pm: |
|
double check your accessory fuse |
Bagoxcalum99
| Posted on Wednesday, August 13, 2008 - 10:25 pm: |
|
Checked the accesory fuse and lo and behold, it was blown. The right side rear turn signal wires were pinched so I made the appropriate tweaks and it solved that little problem. Thanks again! Matt |
Xb9er
| Posted on Wednesday, August 13, 2008 - 10:39 pm: |
|
Been there done that. I've gone through a few accessory fuses. Do what I do and buy a 10 pack of 10w fuses and keep them under your seat with your registration and insurance cards. |
Kmfw160
| Posted on Thursday, August 14, 2008 - 09:16 am: |
|
lol. me too...got a pack in the tool bag. |
|