G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Blacknightrain Posted on Friday, November 15, 2013 - 11:43 pm:        I am doing the stator and regulator upgrade. I removed the harness upgrade. What does this light grey plug go to?   Sparky Posted on Saturday, November 16, 2013 - 12:58 pm:        Going from memory, that's probably the wire from the ECM to control the relay. If so, tape & stow it.   Dhays1775 Posted on Saturday, November 16, 2013 - 04:48 pm:        Sparky, you hit the nail on the head. Blacknightrain, it was used by the stock ECM to activate the relay to open and close one leg of the stator, supposedly to lower the heat in the stator, but in effect actually making the other two legs work harder to maintain voltage, causing it to burn out. It's been a little while since I researched it, but I'm fairly confident that is how it works.   Blacknightrain Posted on Sunday, November 17, 2013 - 01:50 am:        Perfect! Thanks for the help. This project should be done tomorrow.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: