| Author | Message | ||
     1125r_mofo |
I just put my stock exhaust and ecm back on and did a tps reset. I now get an alert "Lt fan sys err", the left fan isn't turning. I've checked all the connections, everything looks fine. The bikes been running on a barkers exhaust, k&n and ebr ecm for the last 6,000 miles without any issues. | ||
| Usas |
Did you disconnect the battery before unplugging the ECM? I can't tell if it could be fried when not having it disconnected. But it's very strange that your EBR ECM worked fine and now having that failure. | ||
| Froggy |
Put the Race ECM back in, see if the fan works then. | ||
| 1125r_mofo |
No, but the alert appeared after a couple of restarts. I was thinking of putting the ebr ecm back on but i don't want to fry that also. | ||
| Froggy |
You aren't going to fry anything, your stock ECM is probably fine. | ||
| Boogiman1981 |
+ 1 to what froggy said. If you didn't pull the battery before swapping that is going to be your issue. Most computers have a specific manor of shut and restart. Don't follow procedure and you get errors. | ||
| 1125r_mofo |
It's still raining in blighty and I don't have a garage, so it's gonna be a while before I switch the ecms' back. Oh well, the supermoto's good for sliding around on until the tarmac dries  Thanks for the reassurance guys, although I work in IT I'm not fond of messing with it, that's usually when it breaks. |
